BURST TEST STAND TECHNICAL DATA: • Pressure test: • Flow rate: • Max temperature: INSTRUMENTATION: • Pressure transmitter: SAFETY DEVICES: • Open doors electric control & interlock • Test area with metal lids against shots and fluid leaks • Emergency button B_21472 test bench is designed for component testing such as: - flexible or rigid pipes - Fittings & quick couplings - Valves - Heat exchanger (radiant masses etc.) The test fluid is hydraulic oil. The machine, with various options, can performs: - burst test; - Pressure test Using a dedicated hydraulic circuit the test bench is able to generate a test cycle done by maintenance and controlled pressure ramps, up and down, according to the following: SAEJ343 - DIN20024 - ISO18869 - ISO1402. The connection system consist of two manifolds: one fixed and the other sliding on a suitable guide able to contain the stresses coming from burst test. Maximum distance between collector connections: 1600 mm. The working cycle is: • Setting pressure cycle with ramps and stationary steps by inserting pairs of points (time-pressure). • Filling and deaeration phase with flow visual indication. • Stabilizing pressure • Component burst POWER SUPPLY: • Electric: • Air: DIMENSIONS AND WEIGHT: • L, p, h: 3200 x 1600 x 1700 mm; • Raw load: ~ 1600 kg COLOR: • Standard Gray 7035.

The test stand is equipped with a PC and NI data acquisition system PC software can sets the test profile and can create a complete test report [pressure vs time]. Test bench meets the requirements of Industry 4.0, as it allows: • Interface with external software to be able to obtain information on the status of the bench and carry out control and management operations of it; • Take advantage of the remote assistance service by the BAVA technicians; • Remote control of the bench compatibly with the permissions of the corporate network. Gui is customizable in multiple languages S.r.l. Head quarter:...