Catalogs >
Bausch Datacom >
Meter reading communication

Meter reading communication
8Pages

Catalog excerpts

Meter reading communication  Meter reading modems for industrial consumers (56100 KVA)  Meter reading modems for consumers (Smart Metering)  Ethernet modems  Secure Modem Management System (MMS) BAUSCH DATACOM Smart solutions for smart

Open the catalog to page 1

Bausch Datacom modems Bausch modem designs are used and approved worldwide. We offer services from the initial concept to schematics, PCB design and prototyping. Our engineering also does approval, compliance testing and coordination of production if necessary. Next to modems the company focuses today on RTUs with RS-485 and Ethernet interface, builtin 2G/3G/CDMA 450 engine and integrated 60870-5-104 SCADA communication protocol. All development and production processes are ISO 9001:2008 quality controlled. GSM/GPRS/3G/LTE/CDMA 450 MHz modems with RS-232 / 485 interface and Ethernet...

Open the catalog to page 2

Communication engine o GSM CSD data o GSM 2G (GPRS)-3G-4G (LTE) o [CDMA 450 MHz] o Quad band mobile modules o Automatic format and speed sensing (300 to 115.200 bps) o AT command set support o Circuit-switched 14.4 Kbps data Antenna o FME connector (SMA optional) o Magnetic GSM antenna included DTE and Ethernet interfaces o 1 x RS485 3-wire/galvanically separated o 1 x RS232 3-wire/galvanically separated o 1 x 10/100 MB Ethernet Port forwarding [IPsec] Upgradeability Firmware update o Locally over Ethernet o Remotely over the air (FOTA) Configuration Embedded high performance ARM®...

Open the catalog to page 3

90-253 Vac / 47-63 Hz 6.3 VAidle 7.5 VAmax 3.5 Widle 4.5 Wmax 2 possible ways to reset the modem: - Configurable, periodical reset (each 1 to 168 hours) 10 LED indicators monitoring the status of the modem Bausch Datacom InduBox bottom enclosure and sealable connector cover (with sealing screw): ABS with self-extinguishing V0 additive - External reset triggered by the '+V'-connection (5-25V) in the RS-232 and RS-485 interfaces: disconnection of power supply during 20 seconds when a negative slope (5-25V to 0V) is detected on the '+V'-input. ( the '+V'connection can also be used for powering...

Open the catalog to page 4

TST25-3 (additional extended immunity tests) ‘modems bestemd voor teleopname van metingen' EN61000-3-2 Electromagnetic compatibility, part 3, section 2 Limits for harmonic current emissions. EN61000-3-3 Electromagnetic compatibility, part 3, section 3 Limitations of voltage fluctuation and flicker. EN61000-4-2 Electromagnetic compatibility, part 4, section 2 Electrostatic discharge immunity test. CISPR24 levels : 4 KV contact / 8 KV air TST25-3 --> 8 KV contact (20 +/- contacts) / 15 KV air (20 +/- discharges) EN61000-4-3 Electromagnetic compatibility, part 4, section 3 Radiated fields...

Open the catalog to page 5

Communication engine o GSM CSD data o GSM 2G (GPRS)-3G-4G (LTE) o [CDMA 450 MHz] o Quad band mobile modules o Automatic format and speed sensing (300 to 115.200 bps) o AT command set support o Circuit-switched 14.4 Kbps data DTE and Ethernet interfaces o 1 x RS485 3-wire/galvanically separated o 1 x RS232 3-wire/galvanically separated o 1 x 10/100 MB Ethernet Antenna o SMA connector o Magnetic GSM antenna included Embedded high performance ARM® Cortex®-M4 processor Full TCP/IP Stack o Full TCP/IP Stack IP, ICMP, UDP, TCP, IGMP, ARP, PPPoS, DHCP client, DHCP Server, DNS client, SNMP agent,...

Open the catalog to page 6

Praxis Modem Management System Server software Client Software... ' Grouping/selecting of modems by telecom operator, operational mode (GSM GPRS) software version, filtenng on data in the modem database. ' Grouped updating of modem firmware - FOTA over FTP -. switching between different AMR metering scenario's, setting of a different baud rate, entering another modem ' Will get the modem statistics out of the database and export a daily file with signal strength of the modems in the field for use in Modem Database 0 Monitors directories for files to import (e.g from the AMR/MDM system) 3...

Open the catalog to page 7

Bausch Datacom Tiensesteenweg 54-56 3360 Korbeek-Lo Belgium Phone: + 32 (0)16 46 12 88 Fax: + 32 (0)16 46 31 51 Pre Sales: info@bausch.be Sales: sales@bausch.be www.bauschdatacom.be BAUSCH DATACOM Smart solutions for smart meters

Open the catalog to page 8

Meter reading communication 8Pages

Catalog excerpts

All Bausch Datacom catalogs and technical brochures

Meter reading communication
8Pages