Catalogs >
Bausch Datacom >
InduBox GSM/GPRS VI (IB GSM/GPRS VI)

InduBox GSM/GPRS VI (IB GSM/GPRS VI)
2Pages

Catalog excerpts

InduBox GSM/GPRS VI (IB GSM/GPRS VI) - 1

GSM/GPRS Communication Devices for the M²M market InduBox GSM/GPRS VI Unblockable ultra stable GSM/GPRS communications Need for an industrial modem with high level electromagnetical immunity At the end of 2006 Bausch Datacom started the development of a new GSM and GPRS ready Indubox modem for the electricity market in Belgium. In Belgium the generic EMC immunity standards are not applicable. For example: to test the immunity of GSM modems to radiated electromagnetical fields from digital radio telephones Laborelec creates a test environment which generates 30 V/m field strengths in stead of the standard 'normal' field strength of 3 V/m (CISPR24 level = 3 V/m). The result of all these extended electromagnetical immunity tests is the Indubox GSM/GPRS VI, an industrial modem for heavy-duty industrial environments. The modem is built in a double sealable housing with transparent lid and has two different and parallel usuable isolated serial interfaces, one RS-232 (3-wire), one RS-485 (3-wire). Removable Phoenix terminal blocks with screw contacts (2-pins plug for mains, 3-pins plug for RS-232 and RS-485 interface) make installation easier. Additional to the electromagnetical immunity to a very high level, the Bausch InduBox GSM/GPRS VI modem has other important industrial features: a wall mountable, non-flammable and sealable housing, a wide range power supply (90-253 Vac), a 3-level watchdog with programmed reset every 24 hours, etc... Those features are not present on standard desktop GSM/GPRS modems. The configuration can be done via a standard RJ-45 interface with 8 contacts via AT-commands. To monitor the status of the InduBox GSM/GPRS VI we have implemented 12 LED indicators. The GSM/GPRS processor inside is a Telit GE-864-PY Quad module with embedded GE 864-PY Script Interpreter. This offers the possibility to run customer made Script codes, for example to bring the Indubox GSM/GPRS VI in a permanent TCP socket listen mode (server) when it is connected to an electricity meter. We have written PYTHON Scripts for different GSM and "GPRS ready" applications in the field. Typical Applications InduBox Options Remote reading of utility meters Vending machine monitoring Remote control Measurement instruments Surveillance systems Point of Sales … 10Vdc - 60Vdc power Your custom option ... Bausch Datacom NV/SA Tiensesteenweg 54/56 B-3360 Korbeek-Lo http://www.bausch.eu/ http://www.proxima.be/ E-mail: automation@bausch.be

Open the catalog to page 1

InduBox GSM/GPRS VI (IB GSM/GPRS VI) - 2

Specifications Housing Bausch InduBox bottom enclosure and sealable connector cover: ABS with self-extinguishing V0 additive Transparent, sealable cover: polycarbonate with self-extinguishing V1 additive Overall dimensions with connector cover: 180 x 108 x 71 mm Overall dimensions without connector cover: 145 x 108 x 71 mm Connectors PCB connector and plug: 2-pin (mains) and 3-pin (RS-232 and RS-485) removable terminal blocks Maximum wiring section 2.5 mm2 Pitch 5.08 mm 50 Ohm FME antenna connector Environmental -10°C / + 50°C 10% - 75% (non condensing) Power Supply 90 – 253 Vac / 47 – 63...

Open the catalog to page 2

InduBox GSM/GPRS VI (IB GSM/GPRS VI) 2Pages

Catalog excerpts

All Bausch Datacom catalogs and technical brochures

InduBox GSM/GPRS VI (IB GSM/GPRS VI)
2Pages