ColourBrain® DrillCheck 4.0
2Pages

Press Release Baumer presents simple to integrate drilling pattern control with smart 3D technology. The inspection system ColourBrain® DrillCheck 4.0 is the technological leader in the inspection of drill hole patterns components. Deviations in the pattern and grooves are reliably detected, visualized and alarmed. The inspection can be carried out on one or both sides of the component and with an additional module, also on the narrow side - without adjustments to the decor and structure and completely independent of height. The compact design is optimized for fast setup and allows easy integration into your existing production line. The system is available for 3 different product widths and thus adapts to any production conditions. Fixed preset, calibrated multi-sensors and predefined inspection parameters on delivery ensure easy commissioning according to the „plug-and-work“ principle. Thanks to the ready-to-install solution with laser scanning, the ColourBrain® DrillCheck 4.0 inspects your entire product range in just a few steps and without any adjustment to component thickness, surface structure or decor. A product change is carried out with just a few clicks, or automatically without further settings, adjustments and set-up times. The user interface summarizes the essential information and supports the system operator in an optimal way. A production with reliable, mechanical inspection meets the requirements of a holistic quality inspection. A qualification as preferred supplier can be supported by production reports. The system is used for process monitoring, both in series and batch 1 production. The system is ideally extended with the narrow-surface inspection ColourBrain® X-Side 4.0, which uses compact camera heads to additionally check the drill holes on the narrow sides. Baumer Inspect

Further information: www.baumerinspection.com/en/products/surface-inspection/drill-pattern-control/ Number of characters (with spaces): ca. 1.831 Baumer Inspection For over 35 years, Baumer Inspection has specialized in providing maximum precision in the inspection and quality assurance of surfaces. With over 750 installed systems, Baumer is the worldwide partner for automatic, optical inspection systems for process control and defect detection. Scanners from Baumer Inspection control furniture panels, decorative papers, foils, floorboards and surfaces or edges of furniture parts all over...