Specifications:
The Actuator TYP 120 SE is available with different spindle options: 10x3, 10x6, 12x12, and 12x16. It operates at voltages of 12-24V or 24-36V, with push and pull forces ranging from 300N to 1200N depending on the voltage and spindle type. The speed varies from 10 mm/s to 50 mm/s. The power rating is between 10W and 40W, with a maximum power input of 50W to 80W and power consumption of 1.5A to 4.0A. The maximum stroke length ranges from 213mm to 518mm, with an overall length calculated as stroke plus 100mm or 52mm.

Procedures and Standards:
The actuator is designed to operate within an environmental temperature range of 0°C to 40°C and has a protection rate of up to IP41, depending on the installation position. It features integrated end switches and a stroke tolerance of +/- 2mm, with operating speed dependent on load and voltage. The cycle duty is specified as 1/9 (10%).

Recommendations:
For optimal performance, ensure the actuator is installed correctly to achieve the specified protection rate. The actuator is not self-locking, so additional components may be necessary for certain applications. Refer to accessories for controllers and add-on components.

Key Data from Graphs:
The graphs illustrate the relationship between current (I) and force (F), as well as speed (V) and force (F) for different spindle types. The data indicates that as the force increases, the current and speed vary depending on the spindle type, with TR 12x16 showing the highest speed and force capacity.