Specifications:
The LIFTERS T 165 AP is designed with a stroke tolerance of +/- 2mm, with operating speed varying based on load and voltage. The lifter type T 165 has a maximum push force of 800 N and a pull force of 400 N. It supports a maximum static lengthwise load of 200 Nm and a dynamic load of 100 Nm. The lateral load capacities are the same as the lengthwise loads. The speed without load is 25 mm/s, and it features a 2-stage lifter version with a maximum custom stroke of 700 mm and a standard stroke of 495 mm. The retracted length is 640 mm, and the length/stroke calculation is given by Length = stroke + 145 mm.

Installation and Electrical Details:
The lifter requires fixing points with 4 x M8 screws for both inner and outer profiles. It operates at a voltage of 24 V/DC with a maximum power input of 144 W and power consumption of 6 A. The cable length is 1200 mm, and it uses an 8-pin MAS 80S plug type. The cycle duty is 1/9 (10%), suitable for an environment temperature range of +10 to +40°C. The protection rate is up to IP54, and it falls under isolation class III. The weight of the lifter is 5.6 kg.

Additional Features:
The lifter includes integrated end switches and a pulse travel length of 0.319 mm/signal (2-Hall).

Graphical Data:
The document includes a graph showing the relationship between current (I) in Amperes and force (F) in kN, as well as velocity (V) in mm/s against force (F) in kN, indicating performance characteristics under varying loads.