MC 64 Foundation crane
14Pages

Dimensions basic machine with HD undercarriage, 900-mm triple-grouser track shoes, uppercarriage with 2 winches and wire ropes, 25 t basic counterweight 18,4 m basic boom including A-frame, boom hoist, roller block, hoist rope, boom foot, boom section 6 m, boom head, pendants and roller head, 100 t hook block Total weight © BAUER Maschinen GmbH, 2/2013

Technical specifications Engine Load hoist assemblies Cummins diesel engine (water cooled) Diesel tank volume Exhaust Emission Standard: EEC 97/68 EC Stage III A EPA/CARB TIER 3 Hoisting winches, powered by controlled hydraulic adjustable motors via integrated planetary gears Main winch 1 Main winch 2 Rope capacity Rope diameter Option: Winch drum diameter CAT diesel engine Output Engine RPM Diesel tank volume Exhaust Emission Standard EPA/CARB TIER 4 final Line speed • Depth control via incremental indicator/absolute sensor • Hydaulic rope control • Load measurement and slack-rope...

Technical specifications Control • PLC control with electric – proportional pre-control for high adaptable operation • Comfort operator cab, FOPS certified • Clearly arranged control board for operation functions at the right hand side • Excellent all-round visibility • B-TRONIC electronic monitoring-, control- and visualization system • Front windshield made of laminated safety glass – Big sized, highly luminous and non-glare LCD color display screen • Resiliently mounted, with exceptional sound suppression • All weather design with safety glass • Tinted glass except front glass • Sliding...

Various multi-purpose applications Grab unit for 2-rope grab operation with mechanical grabs with pounders for dynamic compaction in automatic mode (BDC) Base carrier for hydraulic diaphragm wall grab, together with hydraulic hose handling system and grab turning device for cased bored piles in combination with a grab and a casing oscillator for Bauer deep vibrators TR 75 which are hydraulically supplied by the power station of the crane for various alternatives of vibratory pile drivers with additional power pack mounted at rear for Bauer cutters with different types of hose handling...

Grab equipment 60 % tilting load, 25 t counterweight, 18,4 m boom length Hydraulic grab DHG with hose drum system HDSG Two-rope grab 75 Notes: 1. The rated loads are valid for a planar, firm plane. 2. The rated loads are valid for 360°. 3. The rated loads are valid for maximum crawler width. 4. A maximum wind speed of 20 m/s is considered. 5. A rotation momentum for a rotation speed of 3 rpm of the upper carriage is considered. 6. When the machine is not in use it must stand on planar, firm ground and the grab has to be seated on the ground. 7. “Total weight” of grab includes lifting...

Equipment with deep vibrator TR 75 – VF 30 t counterweight Main winch 250 kN, two-part sheaving (double strand) at masthead Boom length (m) 24,4 27,4 30,4 max. permitted working range (m)** – boom angle (°) max. working range defined by vibrator / boom length ** at active limiting or control of pulling force in combination with display of the working range © BAUER Maschinen GmbH, 2/2013 Notes: 1. The rated loads are valid for a planar, firm plane with horizontal tolerance of ± 1° 2. Values are valid for 360° position of the uppercarriage at the max. track width 3. Wind speed is up to 20 m/s...

Equipment with Trench cutter BC 75 % tilting load, 30 t counterweight Hose tensioning system HTS Hose drum system HDS HTS 38 Cutting depth, max. Cutter weight HTS 50 Cutting depth, max. Cutter weight Notes: 1. The rated loads are valid for a planar, firm plane. 2. The rated loads are valid for 360°. 3. The rated loads are valid for maximum crawler width. 4. A maximum wind speed of 20 m/s is considered. 5. A rotation momentum for a rotation speed of 1 rpm of the upper carriage is considered. 6. When the machine is not in use it must stand on planar, firm ground and the cutter has to be...

Liftcrane operation Boom configurations Boom foot Boom section Boom section Boom head Pulley head © BAUER Maschinen GmbH, 2/2013

Liftcrane operation – Load chart 25 t counterweight, boom length of 18,4 up to 42,4 m, 250 kN winches, loads in metric tons Radius (m) Notes: 1. The rated loads are valid for a planar, firm plane. 2. The rated loads are determined acc. to EN 13000. 3. Weight of lifting accessories (rope, shackles etc.) has to be deducted from the rated load. 4. Radius is stated from centre of swing gear. 5. Values are valid for 360°. 6. Steel structures are designed acc. to EN 13000. MC 64 – Foundation crane 7. The rated loads are valid for maximum crawler width. 8. When travelling with load on uneven, soft...

Liftcrane operation – Load chart 30 t counterweight, boom length of 18,4 up to 45,4 m, 250 kN winches, loads in metric tons Radius (m) 40,0 Notes: 1. The rated loads are valid for a planar, firm plane. 2. The rated loads are determined acc. to EN 13000. 3. Weight of lifting accessories (rope, shackles etc.) has to be deducted from the rated load. 4. Radius is stated from centre of swing gear. 5. Values are valid for 360°. 6. Steel structures are designed acc. to EN 13000. © BAUER Maschinen GmbH, 2/2013 7. The rated loads are valid for maximum crawler width. 8. When travelling with load on...

Liftcrane operation – Load chart 35 t counterweight + 4 t central ballast, boom length of 24,4 up to 48,4 m, 250 kN winches, loads in metric tons Radius (m) Notes: 1. The rated loads are valid for a planar, firm plane. 2. The rated loads are determined acc. to EN 13000. 3. Weight of lifting accessories (rope, shackles etc.) has to be deducted from the rated load. 4. Radius is stated from centre of swing gear. 5. Values are valid for 360°. 6. Steel structures are designed acc. to EN 13000. © BAUER Maschinen GmbH, 2/2013 7. The rated loads are valid for maximum crawler width. 8. When...