Altra Industrial Motion Super Premium Efficiency Gear Motors for Explosion Hazardous Areas

Super Premium Efficiency Gear Motors for Explosion Hazardous Boosting energy efficiency with variable speed drives EU Regulation 640/2009/EC exempts motors for use in explosion hazardous areas from the minimum efficiency requirements for placing new products on the market, because explosion protection takes precedence over the energy savings that can be achieved with motors. This does not mean that there is no potential for energy savings with the electric motors used in the chemical industry. This is why the VIK pamphlet „VIK Recommendation 1: Three-Phase Induction Motors – Technical Requirements“...

Motor Data

Inverter Settings Minimum clock frequency: Short-term current limit: Maximum overload time: Minimum frequency: Maximum frequency: Permissible operating time below fmin: 3 kHz 160% x IN 60 s 5 Hz Up to 180 Hz, depending on motor design 60 s (in open loop mode) All other settings must be selected according the requirements of the drive. The maximum overload time and the permissible operating time below fmin are based on an interval of 10 minutes. Non-standard operating conditions are available on request. Frequency-dependent current limit The continuous current limit of the frequency inverter must...

Investment security for the future Electrically driven machinery accounts for around 70% of overall energy demand for industrial consumption. Energy savings of 135 billion kilowatt-hours per year would be possible within Europe with the use of modern drive systems. Over 85 years of experience in drive technology Advice from gear motor specialists A high level of engineering expertise for custom drive solutions A high level of application expertise Global availability Exceptional flexibility A broad product spectrum –– Pioneering technologies for energy-efficient drives –– Standard Efficiency...

Altra Industrial Motion All Customer Service phone numbers shown in bold Electromagnetic Clutches and Brakes Heavy Duty Clutches and Brakes Ameridrives Couplings Warner Electric Wichita Clutch Bauer Gear Motor GmbH Mill Spindles, Ameriflex,Ameridisc Electromagnetic Clutches and Brakes Pneumatic Clutches and Brakes Erie, PA - USA 1-814-480-5000 Gear Couplings San Marcos, TX - USA 1-800-458-0887 Bibby Turboflex Disc, Gear, Grid Couplings, Overload Clutches Dewsbury, England +44 (0) 1924 460801 Boksburg, South Africa +27 11 918 4270 TB Wood’s Elastomeric Couplings Chambersburg, PA - USA 1-888-829-6637–...