Standards CE-Mark Motors according to EN 60034 UL CCC CSA ATEX GOST ISO9001 ISO14001 OHSAS18001 Gearbox Torque up to 108 Nm Versatile installation possibilities Completely enclosed, sealed against dust and water spray Lubrication change first after 15,000 hrs Low noise gearing Motors Power 0.06 kW ... 5,5 kW IP 66 (Optional) • Connection Standard with CAGE CLAMP® Options Connecting with plug connectors Brakes • Enclosure IP 65 (Standard) • Application and performance optimized brake range • Maintenance friendly design General • Corrosion protection CORO1, CORO2, CORO3 Altra Industrial Motion The BM09 gear motor has exactly the same connection dimensions and gear ratios as the SZ2-V3209 gear motor, which has been manufactured in large quantities over the past 20 years. With it the demands on C1-guideline according VDE2643 is kept. Reliable operation even in hostile environments The drives are supplied with IP 65 degree of protection as standard. This is a great advantage for operation in dusty environments. Low-noise operation The noise emission from two-ratio gear motors is lower than three-ratio motors with the same ratios. The first gear wheel, which is primarily responsible for noise, has a smaller diameter than three-ratio models. ^ \ Gear Motor An Altra Industrial Motion Company The Gear Motor Specialist

Reduced operating costs by high efficiency Gear motor size BM09 in the load range to approx. 2000 kg have worm gears for the first ratio and spur wheels for the second ratio. The specially developed worm gears with very low ratios provide very high efficiency, similar to that of bevel gear drives. Bauer assumes no liability or responsibility for misprints and errors in catalogues, brochures and other printed documentation. Bauer reserves the right to make changes to products without prior notice, including to products that have already been ordered, unless contractual technical specifications...