Battocchio KEYBOARDS FOR YOUR FINGERS • Active touch area: 30 x 30 mm • Active backlight area: 30 x 30 mm • Backlight colour: warm white • Thickness Front Panel: up to 30 mm • Connector male 4 pin 2.54 mm pitch • Plug & Play, ready to use • Intensity and colour of the Backlight can me modify • Touch sensibility can be modify • Big backlight and active area, easy to touch Touch Backlight Button Plug & Play By necessity of one or few backlight buttons, maybe even place far from each other, it may be convenient to install single touch buttons instead of use a backlight and control pcb board very large and expensive The Touch Backlight Button Plug & Play it’s a device ready to use and allows the user to create advanced Human Machine Interface without having the knowledge of capacitive touch technologies It’s enought to place the Touch Backlight Button Plug & Play behind the contact surface (glass, Plexiglas, polycarbonate, wood, marble, stone...) and connect with the rear connector the power supply , the output, and possibly the input in case you want to use the backlight of the button. The graphics of the icon can be made directly on the contact surface, behind it, or directly on the Touch Backlight Button Plug & Play, or we can even provide a high resolution screen printed backlight film to be placed between the contact surface and the button BATTOCCHIO S.r.l. - VIA MARGHERA 1 - 31033 - CASTELFRANCO VENETO - TV - ITALIA - P.I./C.F./REG.IMPR.TV. 04372170268 TEL +39 0423 497702 - FAX +39 0423 498093 - WWW.BATTOCCHIO.COM / [email protected]