SzSCL I— 00 Battocchio KEYBOARDS FOR YOUR FINGERS • Customized according to customer needs in size, pad number, strength range, aesthetics, type of electrical output and connection • Typical dimensional range: 10 mm - 1000 mm, but bigger sizes are also possible • Typical resolution range: 1 - to no physical limit • Typical detected force range: 1N - 10,000N, but however customizable • Connection type: flat 2.54 mm, flat 1.00 mm, or others • Type of electrical connection: common and all outputs, matrix • Medical / Postural PTS Pressure Thin Sensor PTS it is a force/pressure sensor made on thin flexible film. It is made ad hoc according to customer specifications. In it we can design from one to many sensors to cover the senisng area request. Increasing the number of sensors increases the space resolution of the system: in practice we read the X / Y coordinate of the pressure point. The entity of force/pressure recognition it's ensured by the variation of the electrical resistance [Ohm] that is generarated on the pad (pressure point) itself when the pressure on it changes. If the pad it's not pressed, a very high resistive value is read [Mohm], the more you press on the pad, the more the resistence value decreases, up to very low values [Ohm]. Combined with an appropriate data acquisition electronics and ad hoc graphic software, it ‘s possible to acquire data both in log and in real time by displaying them in the form of a "pressographic" map, obtaining the perfect perception of the pressure map detected. BATTOCCHIO S.r.l. - VIA MARGHERA 1 - 31033 - CASTELFRANCO VENETO - TV - ITALIA - P.I./C.F./REG.IMPR.TV. 04372170268 TEL +39 0423 497702 - FAX +39 0423 498093 - WWW.BATTOCCHIO.COM / [email protected]