1. Catalogs
  2. Batsi
  3. ELECTRONIC CONTROLLER MIE 310
video corpo

ELECTRONIC CONTROLLER MIE 310

ELECTRONIC CONTROLLER MIE 310

ELECTRONIC CONTROLLER MIE 310

Product catalog summary
Product Overview: The MIE 310 is an electronic speed sensor utilizing GPS technology, designed for easy integration into various machinery. It replaces traditional wheel sensors and offers a compact design with quick start-up and no need for calibration.
Technical Specifications:
  • Supply Voltage: 12 V
  • Operating Temperature: -20ºC to +80ºC
  • Protection Rating: IP65 according to DIN EN 60529
  • Weight: 166 grams
  • Dimensions: 80x82x57 mm
  • Antenna: Magnetic mounting, high impact, corrosion-resistant, and waterproof
  • Velocity Range: 0.8 km/h to 100 km/h
  • Accuracy: +/- 0.2 km/h
  • Start-up Time: Typically 35 seconds, maximum 60 seconds
  • GPS Frequency: 1Hz, expandable to 10Hz
  • Output Frequency: 36.6 Hz/Kmh (132 pulses/m)
  • Satellite Systems: GPS and GLONASS with SBAS support
Installation Instructions: The sensor is installed in the cabin, with the antenna mounted on top of the tractor. The connection scheme includes:
  • Red wire for +12 V
  • Black wire for ground (GND)
  • Brown wire for 12V PNP signal
  • Blue wire for 12V NPN signal
Connections are made according to the controller's specifications for the speed sensor.
Manufacturer Information: EID Electrònics S.L., located in Torrefarrera, Lleida, Spain. Contact details include phone: +34 973 750 771, fax: +34 973 750 791, and email: [email protected].
Additional Notes: The manufacturer reserves the right to make changes to the equipment without prior notice to improve the product.
See more

Catalog excerpts

ELECTRONIC CONTROLLER MIE 310-1

ELECTRONIC CONTROLLER MIE 310 MIE 310 is a speed sensor using GPS REPLACES THE WHEEL SENSOR Compact equipment easy to be implemented in all kinds of machinery. PRODUCT CARD Very fast start-up and without calibration. It has a battery to keep the data from the GPS satellites and reduce startup time. TECHNICAL FEATURES: Supply: Working temperature: Measurements (HxWxD): Antenna Mounting: Antenna Housing: High impact, corrosion resistant and fully warerproof Velocity Range: Start-up Timing: Output Frequency: GPS+GLONASS with SBAS The manufacturer reserves the right to make changes in their equipment without notice, in order to improve the product. EID Electrònics S.L. C/Camí Les Comes, nº23 Pol. Ind. 25123-TORREFARRERA (Lleida - Spain)

 Open the catalog to page 1
ELECTRONIC CONTROLLER MIE 310-2

Antenna installed at the top of the tractor POWER Sensor speed in the cabin GENERIC CONTROLLER Positive supply sensor Negative supply sensor PRODUCT CARD Wheel sensor Input connection As specified by the controller choosing where to connect the speed sensor The manufacturer reserves the right to make changes in their equipment without notice, in order to improve the product. EID Electrònics S.L. C/Camí Les Comes, nº23 Pol. Ind. 25123-TORREFARRERA (Lleida - Spain)

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.