GPS VELOCITY SENSOR MIE310 INSTRUCTION MANUAL EID Electrònics S.L. Camí les Comes nº23, Pol. Ind. ES25123-TORREFARRERA (Lleida – Spain) Tel.: +34 973 750 771 Fax: +34 973 750 791 www.batsi.eu batsi@batsi.

Introduction This instruction manual was written by the computer manufacturer and is an exclusive part of the product. The instructions in this manual are directed to trained personnel and appropriately rated. Batsi recommends his reading and conservation for future reference. Product Compliance The GPS velocity sensor MIE 310 is a product with CE mark. This equipment was designed and manufactured following the standard EN ISO 14982:2009 (Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria), according to the directive 2014/30/UE and the directive...

Product Removal According with the EU directive 2012/19/EU on waste electrical and electronic equipment (WEEE) Text with EEA relevance, this electronic product has not be removed with the other unclassified residues. Get rid of this equipment to a local collection point for recycling. EN 55022:2010 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement EN 55024:2010 Information technology equipment - Immunity characteristics - Limits and methods of measurement. EN 61000-4-2:2009 Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement...

Antenna with magnetic mounting, high impact resistant, corrosion resistant and fully waterproof. Battery BR1225-3V, more than 2 year’s duration. Start-up timing 35s typical, 60s max. Velocity range between 0’8 km/h - 100 km/h. Satellites: GPS+GLONASS with SBAS. Frequency output (pulse): 132 pulses per metre (0.76 cm/pulse). Square wave output PNP. Square wave output NPN. With external antenna connected: 75mA Working: 90mA Size: Height x Width x Depth  64x98x39 mm Mounting Considerations Avoid installation in areas with excessive vibration. An antenna that moves and is not properly secured can...

Antenna installation Make sure the vehicle surface is clean, dry and free of dust particles. The antenna must be located in an area with a clear view of the sky, mounted on the highest point of the vehicle and the centre of the vehicle roof. Mount the antenna on a metal and magnetic surface. Avoid fixed metal objects that may interfere with the satellite signals. Mount the antenna away from electromagnetic sources, radio antennas and electric motors. Power signal If the POWER LED (green) is illuminated continuously, it indicates that the module is powered. GPS signal indicator If the SIGNAL LED...

Module design:

Wiring schematic:

EiD Electrònics, SL Camí les comes, 23. Polígono Industrial 25123 Torrefarrera (Lleida) SPAIN Hereby declares that the product: Electronic controller Conforms with the provisions of the following EU Directives: EMC Directive 2014/30/EU According to following harmonized standards: EMC This product compiles with RoHS2 Directive 2011/65/EU Restriction on Hazardous Substances according to the standard: EN 50581:2012 Additional standards: This product does comply with the standards: EN 55022:2010, Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement...