Call now on 01495 292 415 Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX Tote Dumper Tote Dumper Description This Tote Dumper is designed to lift and tip a 500 Kgs Pallet Box container (1160mm L x 1160mm W x 1160mm H) at a discharge height of 7600mm. The Tote Dumper is manufactured from Grade 304 stainless steel, is a welded construction throughout and is designed to be bolted to the floor. The lifting is accomplished via chains driven by a motor gearbox mounted at the top of the one column with a crossover shaft to the other column. This Tote Dumper was supplied with an inner and outer lifting carriage. When the lift carriage reaches and activates the full up limit switch at a tip angle of 130 degrees, at this position, the inner lift carriage falls forwards against 2 off adjustable stops to allow a maximum tip angle of 170 degrees. This action was controlled via a pneumatic cylinder with flow restrictors to adjust the rate at which the full box moves. The product was discharged into an enclosed stainless steel chute which fed through a lid on top of the receiving vessel.

Call now on 01495 292 415 Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX Safety Guard to BS EN 14120:2015 Safety of Machinery Guards This Tipper was supplied complete with a safety guard to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards. The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 1.5mm stainless steel sheet which encloses the Tote Dumper to a height of approximately 10 Meters on all sides with a pair of hinged guard doors through which the boxes are loaded. The guard doors are electrically and mechanically interlocked...

Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX Capacity Tip Height Tip Angle Overall Height Machine Handing Maximum Headroom Tipping Chute Container Description Base Arrangement Control Circuit Electrical Rating Limit Switches Gearbox Detail Motor Detail Lift Chain Tensile Strength Tension Chain Tensile Strength Lift Speed 500 Kgs Double Pillar Tote Dumper BTM/2P/500/7600/B/G 500 Kgs 7600mm 170 Degrees 10892mm Right Hand 11000mm Yes, Fitted To Lift Carriage Pallet Box (1160mm X 1160mm X 1160mm H) Telemecanique Sew Eurodrived 1.5 kW, 415V, 3 PHASE, 50 CYCLE c/w BRAKE 1" Simplex...

Call now on 01495 292 415 Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX