Tote Dumper Heavy Duty

Tote Dumper Heavy Duty

Tote Dumper Heavy Duty

Product catalog summary
Tote Dumper Heavy Duty Overview
This document provides a detailed description of the Double Pillar Tote Dumper Heavy Duty, designed for lifting and tipping a 1000 Kgs stainless steel tub. The equipment has a safe working load of 1200 Kgs and is constructed from Grade 304 stainless steel. It features a welded construction and is designed to be bolted to the floor. The lifting mechanism uses chains driven by a motor gearbox.

Safety Features
The Tote Dumper includes a safety guard compliant with BS EN 14120:2015 standards. The guard is made from 40 x 40 x 3mm box section and 2.0mm stainless steel sheet, enclosing the dumper to a height of 2200mm on two sides. It features hinged guard doors that are electrically and mechanically interlocked to prevent operation when open.

Specifications
  • Model No.: BTM/2P/1200/1000/B/G
  • Capacity: 1200 Kgs
  • Tip Height: 1000mm
  • Tip Angle: 130 Degrees
  • Overall Height: 2890mm
  • Machine Handing: Left Hand
  • Maximum Headroom: 3000mm
  • Tipping Chute: Yes, fitted to lift carriage
  • Container Description: St/Stl Tub (1200mm L x 1000mm W x 1000mm H)
  • Base Arrangement: Bolted to the floor
  • Control Circuit: 24 Vac
  • Electrical Rating: IP65
  • Limit Switches: Telemecanique
  • Gearbox Detail: Sew Eurodrive
  • Motor Detail: 2.2KW, 415V, 3 PHASE, 50 CYCLE C/W BRAKE
  • Lift Chain: 1” Simplex, 6000 Kgs tensile strength
  • Tension Chain: 1” Simplex, 6000 Kgs tensile strength
  • Lift Speed: 6.4 Meters/Minute

Control System
The dumper is equipped with an IP65 stainless steel control panel, positioned for easy maintenance access. It includes controls for Up, Down, Guard Release, Emergency Stop, and Reset. The operation is latched, allowing single-button operation for raising and lowering the lift. The control panel also includes a volt-free contact pair for a 'Call to Run' signal.
See more

Catalog excerpts

Tote Dumper Heavy Duty-1

Call now on 01495 292 415 Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX Tote Dumper Heavy Duty Tote Dumper Heavy Duty Description This Double Pillar Tote Dumper Heavy Duty is designed to lift and tip a 1000 Kgs Stainless Steel Tub (1200mm L x 1000mm W x 1000mm H) at a discharge height of ¬1000mm. The Tote Dumper Heavy Duty had a Safe Working Load of 1200 Kgs. It is manufactured from Grade 304 stainless steel, is a welded construction throughout and is designed to be bolted to the floor. The lifting is accomplished via chains driven by a motor gearbox mounted at the top of the one column with a crossover shaft to the other column. Safety Guard to BS EN 14120:2015 Safety of Machinery Guards This Tote Dumper Heavy Duty was supplied complete with a safety guard to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards. The safety guard is constructed from 40 x 40 x 3mm box section and 2.0mm stainless steel sheet. It encloses the Tote Dumper Heavy Duty to a height of 2200mm on two sides, 800mm at the tipping position with a pair of hinged guard doors on the fourth side. The guard doors are electrically and mechanically interlocked preventing the Tote Dumper Heavy Duty from operating when a door is open. Additionally, the guard doors can only be opened when the lift carriage is at the full down position to prevent access whilst a load is raised.

 Open the catalog to page 1
Tote Dumper Heavy Duty-2

Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX Capacity Tip Height Tip Angle Overall Height Machine Handing Maximum Headroom Tipping Chute Container Description Base Arrangement Control Circuit Electrical Rating Limit Switches Gearbox Detail Motor Detail Lift Chain Tensile Strength Tension Chain Tensile Strength Lift Speed Double Pillar Tote Dumper Heavy Duty BTM/2P/1200/1000/B/G 1200 Kgs 1000mm 130 Degrees 2890mm Left Hand 3000mm Yes, Fitted To Lift Carriage St/Stl Tub (1200mm L X 1000mm W X 1000mm H) 2.2KW, 415V, 3 PHASE, 50 CYCLE C/W BRAKE This Tote Dumper Heavy Duty...

 Open the catalog to page 2
Tote Dumper Heavy Duty-3

Call now on 01495 292 415 Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX

 Open the catalog to page 3

All Base Handling Products Limited catalogs and technical brochures

  1. Box Dumper

    3  Pages

  2. Tote Dumper

    4  Pages

  3. Pallet Tipper

    3  Pages

  4. Waste Tipper

    3  Pages

  5. Drum Hoist

    3  Pages

  6. Crate Tipper

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.