Call now on 01495 292 415 Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX Pallet Tipper Pallet Tipper Description This Double Pillar Pallet Tipper is designed to lift and tip a 1200 Kgs Palletainer (1250 x 1250mm x 1700mm High) at a discharge height of ¬2800mm. The Pallet Tipper is manufactured from Grade 304 stainless steel, is a welded construction throughout and is designed to be bolted to the floor. The lifting is accomplished via chains driven by a motor gearbox mounted at the top of the one column with a crossover shaft to the other column. Safety Guard to BS EN 14120:2015 Safety of Machinery Guards The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 3mm wire, 40mm aperture stainless steel weld mesh to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards. It encloses the Pallet Tipper to a height of approximately 4000mm on three sides, with a hinged guard door on the fourth side. The guard door is electrically and mechanically interlocked preventing the Pallet Tipper from operating when the door is open. Additionally, the guard door can only be opened when the lift carriage is at the full down position to prevent access whilst a load is raised.

Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX Capacity Tip Height Tip Angle Overall Height Machine Handing Maximum Headroom Tipping Chute Container Description Base Arrangement Control Circuit Electrical Rating Limit Switches Gearbox Detail Motor Detail Lift Chain Tensile Strength Tension Chain Tensile Strength Lift Speed 1250 Kgs Double Pillar Pallet Tipper BTM/2P/1250/2800/B/G 1250 Kgs 2800mm 130 Degrees 5170mm Right Hand 6000mm Yes, Fitted To Lift Carriage Palletainer Bolted to the Floor 24 Vac IP65 2.2kW, 415V, 3 PHASE, 50 CYCLE c/w BRAKE 1" Simplex 6000 Kgs %" Simplex...

Call now on 01495 292 415 Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX