*mydirectindustry

Mixing Bowl Dumper

Product catalog summary

Mixing Bowl Dumper Overview
This document describes a Single Pillar Mixing Bowl Dumper designed to lift and tip a 140 Quart Hobart Mixing Bowl at a discharge height of 1200mm. It is constructed from Grade 304 stainless steel with a welded design. The lifting mechanism uses a ¾” Simplex chain driven by a motor gearbox located at the top of the main column. A unique safety latch automatically engages in the event of a lift chain failure.

Specifications

Model No.: BTM/200/1200/M
Capacity: 200 Kgs
Tip Height: 1200mm
Tip Angle: 130 Degrees
Overall Height: 2135mm
Machine Handing: Right Hand
Maximum Headroom: 2500mm
Container Description: 140 Quart Hobart Mixing Bowl
Base Arrangement: Mobile On Castors
Control Circuit: 24 Vac
Electrical Rating: IP65
Limit Switches: Telemecanique
Motor Detail: 0.55kW, 415V, 3 PHASE, 50 CYCLE with BRAKE
Gearbox Detail: Sew Eurodrive
Output RPM: 28 RPM
Ratio: 50:1
Load/Tension Chain: ¾” Simplex
Tensile Strength: 3000 Kgs
Lift Speed: 6.4 Meters/Minute

Electrical Control
The Mixing Bowl Dumper is equipped with an IP65 Stainless Steel Control Panel mounted on the main column for easy maintenance access. It complies with the Provision and Use of Work Equipment Regulation 1998 (PUWER). The dumper operates on a ‘hold to run’ principle, requiring the operator to hold the ‘Up’ or ‘Down’ pushbuttons for operation. Releasing the button stops the dumper, allowing for precise control of the tipping angle. The control panel includes a volt-free pair of contacts for a ‘Call to Run’ signal if needed.

Catalog excerpts

Call now on 01495 292 415 Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX Mixing Bowl Dumper Mixing Bowl Dumper Description This Single Pillar Mixing Bowl Dumper is designed to lift and tip a 140 Quart Hobart Mixing Bowl at a discharge height of 1200mm. The Mixing Bowl Dumper is manufactured from Grade 304 stainless steel and is a welded construction throughout. The lifting is achieved by a ¾” Simplex chain driven by a motor gearbox mounted at the top of the main column. The Mixing Bowl Dumper is fitted with our unique safety latch which engages automatically in the extremely unlikely event of a lift chain failure.

Open the catalog to page 1

Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX Capacity Tip Height Tip Angle Overall Height Machine Handing Maximum Headroom Tipping Chute Container Description Base Arrangement Control Circuit Electrical Rating Limit Switches Motor Detail Gearbox Detail Output Rpm Ratio Load/Tension Chain Tensile Strength Lift Speed Single Pillar Mixing Bowl Dumper BTM/200/1200/M 200 Kgs 1200mm 130 Degrees 2135mm Right Hand 2500mm No 140 Quart Hobart Mixing Bowl Mobile On Castors 24 Vac IP65 0.55kW, 415V, 3 PHASE, 50 CYCLE c/w BRAKE Sew Eurodrive 28 RPM 50:1 %" Simplex 3000 Kgs 6.4 Meters/Minute...

Open the catalog to page 2

Call now on 01495 292 415 Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX

Open the catalog to page 3

All Base Handling Products Limited catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list