Call now on 01495 292 415 Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX Mixer Tub Elevator Description This Mixer Tub Elevator is designed to lift and tip a 1800 Kgs HS3 Mixer Tub (1815mm x 1319mm x 890mm H) at a discharge height of 1050mm. The Mixer Tub Elevator is manufactured from Grade 304 stainless steel, is a welded construction throughout and is designed to be bolted to the floor. The lifting is accomplished via chains driven by a motor gearbox mounted at the top of the one column with a crossover shaft to the other column. The Mixer Tub is loaded to tip along its long length using a Forklift Truck or similar.

Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX Capacity Tip Height Tip Angle Overall Height Machine Handing Maximum Headroom Tipping Chute Container Description Base Arrangement Control Circuit Electrical Rating Limit Switches Motor Detail Gearbox Detail Lift Chain Tensile Strength Tension Chain Tensile Strength Lift Speed Double Pillar Mixer Tub Elevator BTM/2P/1800/1050/B/G 1800 Kgs 1050mm 130 Degrees 3560mm Left Hand 5200mm Yes, Fitted To Lift Carriage Hs3 Mixer Tub Bolted To The Floor 24 Vac IP65 2.2kW, 400V, 3 PHASE, 50 CYCLE c/w BRAKE Sew Eurodrive 1" Duplex 12000...

Call now on 01495 292 415 Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX Mixer Tub Elevator Electrical Control This Mixer Tub Elevator is fitted with an IP65 Stainless Steel Control Panel which is mounted on the Safety Guard at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). The control panel incorporates the following controls; Up, Down, Guard Release, Emergency Stop and a Reset Facility. Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but...

Call now on 01495 292 415 Units C & D Roseheyworth Business Park, Abertillery, Gwent. NP13 1SX