Catalog excerpts
Elektronik GmbH Page: Document: Date: Revision:
Open the catalog to page 1Page: Document: Date: Revision: SAFETY INSTRUCTIONS Product description This manual contains notices which you should observe to ensure your own personal safety, as well as to protect the product and the connected equipment. These notices are highlighted in the manual by a warning symbol and are marked as follows according to the level of danger: Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are defined as persons who are authorized to commission, to ground and to tag circuits, equipment and systems in accordance with established safety...
Open the catalog to page 2Elektronik GmbH Page: Document: Date: Revision: Mounting The lococube® must be installed and wired by a trained technician who knows and complies with both the universally applicable engineering rules and the regulations and standards that apply in specific cases. 2.2.2 Connecting the power supply The GT-900 features an outstandingly wide supply voltage range from 7 to 32 VDC at lowest current consumption. So the lococube® can be integrated within battery supplied 12V or 24V DC systems (cars, trucks, battery powered cars, forklifts and diggers, for example). Turn off the power supply before...
Open the catalog to page 3Elektronik GmbH We kindly refer you to the following manufacturer website: www.barth-elektronik.com Page: Document: Date: Revision: CAN 2.0A/B: 11/29 bit ID, base frame format Baud rates: 50, 100, 125, 250, 500 kbit, 1Mbit CAN FD Baud rates: 2, 5, 8Mbit CANopen® multi line, single line, master, slave Type in the product name (e.g. GT-900) and get the product-related documents and software. SAE J1939 NMEA 2000 Meets or exceeds the requirements of applications ISO 11898-2, loss of ground protection from –55 V to +55 V, thermal shutdown protection Programming interface To program the GT 900,...
Open the catalog to page 4Elektronik GmbH 4.1.6 Timebase (oscillator) Primary Oscillator Crystal quartz MEMS unit (precise ‚micro-electro-mechanical system‘) Nominal Frequency Frequency aging Frequency tolerance Page: Document: Date: Revision: Calcuation basis Calculation formula DIN EN ISO 13849-1:2008 Annex C.5: MTTF, MTTFd data of electrical components (typical and worst case) D.1: Parts count method (worst case with safety factor 10) 4.1.7 Electrical connection Electrical Connection plugable spring terminal connectors 0.25 to 1.5 mm² Manufacturer: Phoenix Contact Series: COMBICON Type: FMC1,5/x-ST-3,5-BK 4.1.8...
Open the catalog to page 5Elektronik GmbH 4.1.13 Ordering information Ordering information mini-PLC Ordering information accessory Programmer ST-Link/V2 ISOL (Open Source programming) Art. No. 0017-0066 GTIN 4251329401269 Programmer PG-30 (Open Source programming) Art. No. 0017-0030 GTIN 4251329401481 Documents, videos and software Detailed information, additional documents, application notes and videos relating to this product are downloadable from www.barth-elektronik.de. Page: Document: Date: Revision: Conformity declaration For the following designated product it is hereby confirmed, that the construction in...
Open the catalog to page 6All BARTH catalogs and technical brochures
-
DMA-15
7 Pages
-
STG-950
8 Pages
-
STG-800/STA-800
8 Pages