DMA-15
7Pages

Elektronik GmbH Page: Document: Date: Revision: 4 Operation with miCon-L 4 4.1 Connecting the mini-PLC 4 4.2 Operation 4 5 Operation with KEIL® µVision® 4 5.1 Software download

Page: Document: Date: Revision: SAFETY INSTRUCTIONS Product description This manual contains notices which you should observe to ensure your own personal safety, as well as to protect the product and the connected equipment. These notices are highlighted in the manual by a warning symbol and are marked as follows according to the level of danger: The picture below shows the CAN Touch Display DMA-15 lococube® (Art. No. 0044-0015). Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are defined as persons who are authorized to commission, to...

Elektronik GmbH The CAN Display DMA-15 can be directly connected to any BARTH® mini-PLC providing a CAN interface. In case you use the miCon-L Software as you favourite graphical programming tool, BARTH® provides a free template to control the DMA-15 by a STG-8xx mini-PLC. In the second programming option the DMA-15 is controlled by a BARTH® Open Source mini-PLC (STG-8xx) which provides fully Open Source design using the powerful KEIL® μVision® Software Suite. Customer-tailored screens can be easily created using the EMG Embedded Menu Generator (free software tool from BARTH® Download...

Elektronik GmbH The communication between the mini-PLC and the DMA-15 ensures via CAN bus, setting a fixed baud rate of 250 kBit/s. Please download the related Product Documentation and Software: https://barth-elektronik.com/en/ getstarted.html The Software Package includes free and ready-to-use sample programming templates. To create your own project simply modify or extend one of the following programming templates. Operation with miCon-L To operate the DMA-15 with a CAN Bus equipped mini-PLC, first establish proper power and CAN connection between both devices. Please wire the ‚CANH‘...

The DMA-15 can also be programmed with a userdefined screen layout, selectable and controlable via one CAN message by any BARTH® Open Source mini-PLC which supports CAN bus. You only need a Open Source Programmer (PG-30, BARTH® Art. No. 0017-0030). Software Download 7.1.1 General Hardware design Programming options To create a customized screen layout you have to download the EMG Software Tool. Please download the related Product Documentation and Software: https://barth-elektronik.com/en/ getstarted.html You can find the EMG Software Tool within the software package 9045-0023. For...

Elektronik GmbH 7.1.5 Security features Security Features System and independent watchdog Fail safe oscillator Power on/down reset Supply voltage supervisor 7.1.6 Program and data memory Memory 7.1.7 Timebase (oscillator) Primary Oscillator Nominal Frequency Frequency tolerance Frequency aging Crystal quartz MEMS unit (precise ‚micro-electro-mechanical system‘) 16.000 MHz ±50 × 10-6 ±5 × 10-6 / year max. 7.1.8 Electrical connection Electrical Connection Page: Document: Date: Revision: 7.1.11 Weight and dimensions Weight Dimensions Panel cut-out 90 g (without connector) 69 x 50 x 31 mm...

Elektronik GmbH Page: Document: Date: Revision: Documents, videos and software Detailed information, additional documents, application notes and videos relating to this product are downloadable from www.barth-elektronik.com and www.micon-l.de Disposal If you wish to finally dispose of the product, ask your local recycling centre or dealer for details about how to do this in accordance with the applicable disposal regulations. Conformity declaration For the following designated product it is hereby confirmed, that the construction in that technical design brought by us in traffic corresponds...