Website:
BARTEC
Group: Bartec
Catalog excerpts
ASTM compliance Capillary type viscometer Kinematic viscosity directly measured Calculation of dynamic viscosity Hagenbach correction not necessary ATEX certified Customized solutions Network and Fieldbus communication Process Analyzer Viscosity Process Analyzer VISC-4
Open the catalog to page 1
Viscosity Process Analyzer VISC-4 Application The BARTEC BENKE Viscosity Process Analyzer (VISC-4) is a continuously kinematic viscosity measuring capillary analyzer suited to measure the viscosity of a product. The VISC-4 operates online. It serves to monitor/maintain product quality for the in-spec production of mineral oil products. Three basic variants are available: measuring temperature 20 to 60°C (68 to 140°F) measuring temperature 41 to 60°C (106 to 140°F) measuring temperature 61 to 100°C (142 to 212°F) Each variant available with following measuring ranges: viscosity 0.7 to 30 cSt...
Open the catalog to page 2
Norms and Standards ASTM D 445 DIN EN ISO 3104 IP 71 Method The value of kinematic viscosity results from the product of the measured passage time and the device constant of the capillary: v = C * t. As viscosity is highly dependent on the temperature, the temperature of the liquid during the measurement has to be regulated precisely with minimum variation (0.02 K in accordance with ASTM D 445). For a continuous determination of the viscosity of a liquid during the production process the liquid is controlled in viscometers through a capillary. From the mass flow rate through the capillary...
Open the catalog to page 3
Viscosity Process Analyzer VISC-4 Explosion protection Ex protection type II 2G IIC T3 or T4 depending on TM* Certification TÜV 09 ATEX 554794 CSA certificate no. pending Signal outputs and inputs/harwired interface various analog and digital signals available; to be specified, see options Electrical data of signal outputs and inputs Analog outputs 2 x 4 to 20 mA 800 Ω out; active isolated on request Digital outputs Technical data Auxiliary power supply output continuously analyzing kinematic viscosity, capillary-type according to ASTM D 445, DIN EN ISO 3104, IP 71 Digital inputs Measuring...
Open the catalog to page 4All BARTEC catalogs and technical brochures
-
HCDT3 Pages
-
HYGROPHIL F4 Pages
-
VI_44 Pages
-
PPA4 Pages
-
MGA-nano4 Pages
-
CFPP5 Pages
-
FPA1 Pages
-
A/xx4 Pages
-
3649231 Pages
-
1273092 Pages
-
R28102 Pages
-
R300/301/3028 Pages
-
R26104 Pages
-
R310/11/12/209 Pages
-
R2712 Pages
-
309267_13 Pages
-
RVP_44 Pages
-
DPA2 Pages
-
CPA_44 Pages
-
Switchgear and control gear4 Pages
-
A200865_72 Pages
-
A200865_16 Pages
-
A200663_41 Pages
-
A240847_12 Pages
-
A2008632 Pages
-
A2800711 Pages
-
A200639_1E4 Pages
-
A2006392 Pages
-
321815_1E3 Pages
-
E246952_1E2 Pages
-
E301445_E1 Pages
-
E246821_1E2 Pages
-
E246957_1E4 Pages
-
246903_1E4 Pages
-
E246904_2E1 Pages
