Catalogs >
BARTEC >
R2810

R2810
2Pages

Catalog excerpts

INFRAcheck Type R2810 Product information and Operating instructions INFRAcheck is a high precision instrument that allows an easy and quickly on site check of your pyrometer. A highly precise, long term stable control system guarantees a control accuracy for the radiation source of ±2 °C. The emittance of the target area is nearly 1. Thus you are able: – exactly to check the long term stability resp. the performance of your pyrometer or your infrared camera, – to recognize changes to measurement characteristics caused e.g. by soiled optics, – to recognize faults in post-processing (indication, process control system). Application Because the conditions of assembling, surrounding and pyrometer settings are not always ideal, you should proceed as follows: Having installed the pyrometer at the measuring point and adjusted the emittance to suit the measurement duty, take a reference measurement with INFRAcheck. Note the measured value. Take reference measurements in regular intervals and compare the measurement with the first measurement. If the deviation is greater than the allowed inaccuracy of your measuring system, a fault has occurred or the gage length is soiled. Operation Connect the connection cable of the power supply unit to the socket at the INFRAcheck and connect the power sypply unit to a mains socket (AC 230 V). 5 minutes after the LED switches from red to green the specified temperature is reached with a tolerance of ±0,4 °C. For the different types of pyrometers are matching adapters available. Attach INFRAcheck always with the matching adapter to the pyrometer. The pyrometer should display the temperature, that is specified at the INFRAcheck. Power supply unit BARTEC Componenten und Systeme GmbH ! Schulstraße 30 ! D-94239 Gotteszell ! Telefon +49(0)9929 301-0 ! +49(0)9929 301-112

Open the catalog to page 1

Safety precautions When taking measurements you should always fasten the INFRAcheck with the matching adapter. Holding the instrument briefly with your hand causes invalid measurements. The INFRAcheck must not touch the pyrometer longer than 1 minute. The pyrometer will get hot, therefore the measuring values can temporary drift INFRAcheck is a high quality instrument. Hard shocks, high humidity, dirt and storage below 0°C should be avoided! Technical Data Temperature of radiator Emittance ε Response time Accuracy Operating status indication Technology Target area Operating voltage Current...

Open the catalog to page 2

R2810 2Pages

Catalog excerpts

All BARTEC catalogs and technical brochures

R2810
2Pages