Customized solutions ATEX, CSA, GOST certified Network and Fieldbus communication Process Analyzer Cloud Point Process Analyzer CPA-4

Cloud Point Process Analyzer CPA-4 Application The BARTEC BENKE Cloud Point Process Analyzer (CPA-4) is a system for the fully automatic determination of the cloud point (CP) of transparent mineral oil products. The CPA-4 operates online. It serves to monitor/maintain product quality for the in-spec production of mixtures such as diesel fuel and heating oil. YOUR competent partner safe Special Features Rugged design of measuring cell Optimized assembly – easy removal of complete cell Available communication interfaces: - Modbus/RTU, Modbus/TCP - Remote Access via modem, ISDN, LAN, VPN Failure...

Norms and Standards ASTM D 2500 DIN EN 23015 ISO 3015 IP 219 These norms and standards set the operating limits for cloud point measurement for mineral oil products which are clear at a path length of 40 mm (for IP and ASTM 1 ½ " = 38 mm) and have a cloud point below 49 °C (120 °F). Method The product sample is cooled under specified conditions and its turbidity is observed. The temperature at which a cloud of paraffin crystals first appears, is measured as the CP. The CPA-4 uses a photometric measurement principle. Note: Illustrations of this brochure show a typical CPA-4 Analyzer with the optional...

Cloud Point Process Analyzer CPA-4 Protection type depending on application Optional available Class I, Div. 2, Groups B, C and D classification Class I, Zone 1, Groups IIB or IIB+H, (USA and CAN) Protection type depending on application Technical data (limited within a range of 30K) Measuring cycle discontinuous (according to standard procedure) Product streams 1 x sample, 1 x validation Nominal voltage AC 230 V ± 10 %, 1 phase; 50 Hz other rating on request Maximum power approx. 600 W Ambient temperature operation 5 to 40 °C (41 to 104 °F) Ambient humidity operation 5 to 80 % relative humidity,...