User manual SuperCutter Brugervejledning SuperCutter

Ensure that the operator is provided with this user manual before the cart is used for the first time. It is important that the operator fully understands the contents of this manual before using the SuperCutter. Upon subsequent resale of the SuperCutter the manual should be handed over to the new owner. The content of this user manual is based on information that was current at the time of publication. As our products are continuously being developed, changes in specifications will inevitably occur from time to time. If you find information in this manual that differs from the cart in question,...

1.2 Lift with crane 9 2.6 Improper operating methods 12 3.1 Safety instructions for maintenance and inspection work 14 3.2 Safety instructions for the operator/user 14 3.4 Additional safety advice 15 6.0 GOOD SERVICE AFTER PURCHASE 19

EU declaration of conformity We: Baron A/S Denmark hereby declare under our own responsibility that the below products Baron SuperCutter are in conformity with requirements of the following directives from the EU Council The following standards have been applied: Safety of Machinery - General principles for design - Risk assessment and risk reduction. Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards Hydraulic fluid power - General rules and safety require-ments for systems and their Cqrsten Fils©

Dear customer, With our enduring promise of ”No Compromise,” we aim to assist our customers in meeting their needs for handling tiles in an efficient and ergonomically correct manner. With our unique handling solution, we contribute to enhancing our customers’ performance. Your new BARON product is designed based on many years of experience in product manufacturing. The product is made using the latest technology and complies with recognized safety technical regulations and standards. We wish to provide a product in such a way that no damage or misunderstandings occur either during its use or...

Furthermore, we strive to offer the best possible after-sales service and a quick and efficient supply of spare parts. Please read this manual carefully before assembling or using this cart. If any questions arise, contact your local dealer for assistance. Use only original BARON spare parts on BARON machines, carts, and equipment. Definitions: The following definitions apply throughout this user manual: WARNING: Warns of a potential situation that could result in bodily harm if instructions are not followed carefully. CAUTION: Warns of a potential situation that could result in damage to the...

SuperCutter is manufactured in accordance with the safety directives of the authorities. This user manual contains information regarding: » Regulatory use » Physical limitations of the product » Risks of misuse. Therefore, please review this user manual thoroughly.

» Mechanically adjustable brick cuts » Hydraulic pump » Pressure relief valve » Cylinder

EN 1.2 Lift with crane Lifting with a crane. It is important to comply with the applicable lifting regulations at the work site. Tilt the SuperCutter forwards so that it rests on top. Insert lifting stops in the handles shown. Then lift with the crane. See figure 1. ATTENTION! After transport lying down, a little oil may have dripped out of the plastic vent at the top of the pump. Wipe this away.

2.0 FUNCTION AND IDENTIFICATION2.1 General 1. Pump 6. Adjustment screw, bottom knife

EN 2.2 Commissioning/Operation Commissioning: Before use, check that no parts are loose. It is recommended for first-time users of the SuperCutter to familiarise themselves with its operation and features before actual use. This can be done, for example, by cutting slightly different bricks and quantities from 1 - 8 bricks in an area where there is plenty of space. Operation: Lay bricks with the pliers. Tilt the laying/adjustment handle down to match the desired brick length. Pull the bricks towards the adjustment handle, making sure they are in the centre. Tighten the red hand screw (see figure...

EN 2.3 Personal safety Always use strong, durable gloves, and safety shoes when workign with the SuperCutter. Make sure that others keep their distance when the product is in operation. NEVER put your hands in the cutting area. The blades are sharp. 2.4 Intended use The SuperCutter is used to cut many different hardnesses of bricks. The SuperCutter is designed exclusively for general use in masonry applications. It can cut up to 8 bricks at a time - however, a maximum of 4-5 bricks is recommended if the brick type is hard. When 8 bricks are laid, they are pushed towards the right-hand side of...

EN 2.6 Improper operating methods The operational safety of the product supplied can only be guaranteed if it is used in accordance with its intended use - as described in the instructions for use. The limit values specified in the data sheets must not be exceeded under any circumstances. The product is unsuitable for anything other than cutting bricks. The product must never be used for anything other than what is described in this manual. NEVER use the product with anything other than bricks.

EN 3.0 OPTIMAL SIKKERHED The safety instructions stated in the user manual, the applicable national accident prevention regulations, and any internal work, operating, and safety regulations of the person responsible for the operation must be followed. Safety regulations: » Keep your hands away from both the upper and lower blades unless they need to be replaced. » Never put anything between the blades other than bricks. » Do not drive over high edges that can cause the product to tip over. » The product is intended for use on even and level floors or terrain. » Do not leave bricks on the product...

EN 3.4 Aditional safety advice Training: » The operator must be competent and fully capable of performing work with this SuperCutter in a safe and efficient manner before using the SuperCutter in a public accessible location. We therefore advise that the prospective operator makes use of all available training courses from, among others, our dealers. Safety equipment: » It is recommended that the following safety equipment be worn when working with or performing maintenance on the machine: » Boiler suit » Safety shoes » Helmet » Goggles » Ear protection » Work gloves While a wide range of risk...