Concrete roller w/battery Betonjutter m/batteri

Ensure that the operator is provided with this user manual before the cart is used for the first time. It is important that the operator fully understands the contents of this manual before using the SuperCutter. Upon subsequent resale of the SuperCutter the manual should be handed over to the new owner. The content of this user manual is based on information that was current at the time of publication. As our products are continuously being developed, changes in specifications will inevitably occur from time to time. If you find information in this manual that differs from the cart in question,...

2.7 Improper operating methods 12 3.1 Safety instructions for maintenance and inspection work 13 3.2 Safety instructions for the operator/user 13 3.4 Additional safety advice 14 4.3 Daily maintenance of the batteri and charger 16 6.0 GOOD SERVICE AFTER PURCHASE 18

EU declaration of conformity We: Baron A/S hereby declare under our own responsibility that the below products Baron BetonJutter are in conformity with requirements of the following directives from the EU Council The following standards have been applied: Safety of Machinery - General principles for design - Risk assessment and risk reduction. Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Cqrsten Filso

EN Foreword Dear customer, With our enduring promise of ”No Compromise,” we aim to assist our customers in meeting their needs for handling tiles in an efficient and ergonomically correct manner. With our unique handling solution, we contribute to enhancing our customers’ performance. Your new BARON product is designed based on many years of experience in product manufacturing. The product is made using the latest technology and complies with recognized safety technical regulations and standards. We wish to provide a product in such a way that no damage or misunderstandings occur either during...

Furthermore, we strive to offer the best possible after-sales service and a quick and efficient supply of spare parts. Please read this manual carefully before assembling or using this cart. If any questions arise, contact your local dealer for assistance. Use only original BARON spare parts on BARON machines, carts, and equipment. Definitions: The following definitions apply throughout this user manual: WARNING: Warns of a potential situation that could result in bodily harm if instructions are not followed carefully. CAUTION: Warns of a potential situation that could result in damage to the...

EN 1.0 BEFORE THE FIRST JOB Concret roller w/battery is manufactured in accordance with the safety directives of the authorities. This user manual contains information regarding: » Regulatory use » Physical limitations of the product » Risks of misuse. Therefore, please review this user manual thoroughly.

» Battery-powered with vibration motor » Option: different pipe lengths » Option: extra battery » Electric vibration

5. Tube. Shown here with 1000 mm tube.

EN 2.2 Comissioning/Operation Commisioning: Before use, check that no parts are loose. The battery is fully charged (= blue light). It is recommended for first-time users of the product to familiarise themselves with its operation and driving characteristics before actual use. This can be done, for example, by trying it out in an area where there is plenty of space. Always switch off the product on the vibration control and remove the battery before storage. Daily use: Wear good gloves. Baron always recommends using anti-vibration gloves that are CE labelled EN/ISO 10819. Have the concrete roller...

EN 2.3 Vibration regulation Adjust the vibrations with the ”vibration control”. For normal work, it is recommended that the control is set in the centre of the green area. This will give the necessary vibration and the longest battery life. In hot weather where the concrete dries quickly, it may be necessary to turn the control all the way up to the yellow range. If extreme, even in the red range. In these cases, the battery life will be significantly reduced and the vibration will be at a level that limits how long you should use the concrete cutter on a daily basis. 2.4 Personal safety Always...

EN 2.7 Improper operating methods The operational safety of the product supplied can only be guaranteed if it is used in accordance with the intended use - as described in the instructions for use. The limit values specified in the data sheets must not be exceeded under any circumstances. The product must never be used for purposes other than those described in this manual. NEVER use the product for anything other than what is described in this manual.

EN 3.0 OPTIMAL SAFETY The safety instructions specified in the user manual, the applicable national accident prevention regulations and any internal work, operating and safety regulations of the operator must be observed. Safety regulations: » Never use the product if it is defective! » The controls are NOT waterproof and must not be exposed to water! » Never short-circuit the product! 3.1 Safety instructions for maintenance and inspection work The operator must ensure that all maintenance, inspection and installation work is carried out by authorised and/or qualified specialists who have sufficient...

EN 3.4 Additional safety advice Training: » The operator must be competent and fully capable of working with this product in a safe and effective manner before using the product in a public place. We advise that the prospective operator makes use of all available training courses from, among others, our dealers. Safety equipment: » It is recommended that the following safety equipment is worn when working with or performing maintenance on the machine: » Boiler suit » Safety shoes » Hard hat » Safety glasses » Hearing protection » Work gloves Although a wide range of risk factors are mentioned...