Exstreamer_P5_30
2Pages

Universal, Multiformat IP Audio Decoder with Amplifier, PoE powered The Exstreamer P5 is a member of the Barix Exstreamer product family, versatile Audio over IP codecs (encoder/ decoder) for use in a wide field of applications, from broadcast to instore, from distribution of music in hotels to SIP telephone paging applications. Based on reliable, embedded, low power, solid state technology, the device is ideally suited for 24/7 operations, does not need cooling or maintenance, and is not prone to usual issues caused by operating systems. Ethersound (ES-100/Spkr) support allows the devices to be used as a dual channel receiver/ decoder in realtime audio distribution applications which target ultra low latency for live audio. The Exstreamer P5 provides amplified audio (5W RMS) directly into an 8 Ohm speaker. The device draws its power from an 802.3af Ethernet connection. A serial and IR port (on an RJ-45 connector) allows direct connection of the Barix VSC or similar in-room controls. Various standard software packages for specific applications are available for download from the Barix website, from applications optimized for hospitality, retail and broadcast to a full featured SIP client, suitable as a paging interface. Custom software can easily be written, based on existing packages from Barix or freely in the ABCL (Basic dialect) scripting language. Software Exstreamer P5 available • All-in-one solution for Audio over IP decoding and distribution • Supports IP standards such as TCP/IP, RTP, SIP, Multicast • Suitable for use in broadcast, paging, in-store applications • Supports Audio formats such as AAC+ V2, MP3, PCM, Ogg Vorbis, G.711 • RS-485 Serial Interface for IR and local control • Integrated 5W RMS Amplifier, PoE (802.3af) powered Overhead Speaker Interface with Amplifier Commercial audio streaming applications Playback point in an IP PA system In-room IP Device for Hotels, Venues In-store audio distribution SIP based paging interface Zone output device for IP distributed audio Ethersound (ES-1

Technical Specifications Electrical • Power supply via 802.3af (PoE) Ethernet, 15 Watt max. • 10V supply output to in-room control IR Interface • IR via serial port interface connection • Supports Barix IR receiver (with adapter) and VSC Ethernet • 10/100Mbps auto, 802.3af • RJ-45 connector with integrated Link/Activity LED • Protocols: TCP/IP, UDP, RTP, SIP, DHCP, Multicast capable • ES-100/spkr (Ethersound, output, no daisy-chain) support Mechanical • Aluminum case, 300g, with mounting wings for direct wall mounting Analog Output • Amplified output, short circuit and overload protected •...