IP Audio decoder with S/PDIF and 2x25W amplified output, USB/microSD. Support of Internet Radio (AACplus, MP3, shoutcast, TCP streaming) and VoIP (SIP, RTP) codecs and protocols. The Exstreamer 20x devices manage and decode IP Audio streams and content, playing out the decoded audio through a built-in amplifier and S/PDIF. Software Applications written for the device support a large number of protocols and audio formats. Depending on the application, they make use of external content storage (MicroSD/USB), the IR input, serial port and the stereo audio input to enable the use of the device in a variety of applications, being it Broadcast, VoIP, Message storage and playout or as an IR controlled zone audio receiver/amplifier with local input. • Instore Audio Player • Multiroom IP Audio System Receiver • Generic VoIP decoder for IP Paging and Announcement applications • Internet Radio Receiver • Commercial Audio Streaming Applications • SIP and IP Paging Zone Device • Digital Annunciator, Message Player, Message Repeater AACplus, MP3, Ogg Vorbis, G.711, PCM Decoding IP Streaming via TCP, UDP, RTP, Multicast Amplified Output 2x25W (8 Ohm) Stereo headphone mini jack Digital Optical Out (S/P DIF) RS-232 Serial Port USB/microSD Flash Memory Interface IR Int

Technical Specifications Electrical • Supply Voltage 24 VDC, 70 Watt max. • 2.1mm barrel connector Ethernet • 10/100Mbps Auto-negotiation • RJ-45 connector with integrated Link/Activity LED • Protocols: TCP/IP, UDP, RTP, SIP, DHCP, Multicast capable, webserver for control, status and configuration Analog Output • 2 x 25 W (RMS @ 8 Ohm) speaker outputs • Headphone mini jack (3.5 mm, 1/8 inch) • S/P DIF out (optical) • Output level software controllable • Frequency response (-3 dB) 19 Hz .. 20 kHz * • Signal to Noise Ratio 94 dB *, THD <0.05% * * depends on used codec, best results @48kHz PCM Audio...