Exstreamer_100_105_110_120

Product catalog summary

Overview: The Exstreamer 1xx series are IP audio decoders designed to decode IP audio streams and output the audio to amplifiers or speakers. They support various protocols and encoding methods, making them suitable for applications such as broadcast, internet radio, and VoIP.

Applications: These devices can be used as multiroom IP audio system receivers, instore audio players, internet radio receivers, SIP and IP paging zone devices, digital annunciators, message players, and generic VoIP decoders for IP paging and announcements.

Features: The Exstreamer 1xx supports AACplus, MP3, Ogg Vorbis, G.711, and PCM decoding. It offers IP streaming via TCP, UDP, RTP, and multicast, with line-level stereo output and RS-232 serial port. The power supply ranges from 9 to 30 VDC or 12 to 24 VAC.

Technical Specifications:

Electrical: 9 to 30 VDC, 12 to 24 VAC, 6 Watt max, with a 2.1mm barrel connector.
Ethernet: 10/100Mbps auto-negotiation with RJ-45 connector.
Analog Output: Line level output with 40-60 Ohm impedance, software-controllable output level, and a frequency response of 19Hz to 22kHz.
Audio Formats: Supports MP3, AAC-HE, Ogg Vorbis, WMA, PCM, G.711, and G.722.
IR Interface: Built-in IR receiver and remote control for models 110 and 120.
RS-232 Interface: Male 9-pin Sub-D connector with 300 to 230,400 Baud rate.
Display: Backlit LCD, 2x16 characters for models 110 and 120.

Mechanical: The device features an aluminum case, weighs 250g, and is rack and wall mountable. Dimensions are 108x38x78.7mm.

Environmental: Operating temperature is 0 to +40°C, with storage conditions of 0 to +70°C. Relative humidity is 0-70%, non-condensing.

Certifications: The product complies with RoHS, FCC, CE, and C-Tick standards, with immunity and emissions according to EN standards.

Model Comparison: Models differ in display, memory, IR, and relay features. Models 110 and 120 include a display and IR, while models 100 and 105 do not.

Ordering Information: Various packages are available for EU, US, UK, and without PSU, along with accessories like wall mounting brackets and rack mounts.

Catalog excerpts

IP Audio decoder with USB/Micro SD flash interface and serial port The Exstreamer 1xx family of products decode IP Audio streams and play out the recieved Au- dio signal to amplifiers or speakers. Supporting a large number of protocols, encoding methods and application specific firmware, the products can be used for Broadcast, Internet Radio, as well as VoIP applications. Control and local storage interfaces are device specific to match • Multiroom IP Audio System Receiver • Instore Audio Player • Internet Radio Receiver • SIP and IP Paging Zone Device • Digital Annunciator, Message Player, Message Repeater • Generic VoIP decoder for IP Paging and Announcement applications • Commercial Audio Streaming Applications • Line Level Output (Stereo)

Open the catalog to page 1

Technical Specifications Electrical • 9 to 30 VDC, 12 to 24 VAC, 6 Watt max. • 2.1mm barrel connector Ethernet • 10/100Mbps Auto-negotiation • RJ-45 connector with integrated Link/Activity LED • Protocols: TCP/IP, UDP, RTP, SIP, DHCP, Multicast capable, webserver for control, status and configuration Analog Output • Line level output, 40..60 Ohm impedance on RCA and 1/8” headphone jack • Output level software controllable • Full scale output voltage: 5.6 dBu, 4 Vpp • Frequency response (-3dB) 19Hz ..22kHz * • Signal to Noise Ratio 87 dB *, THD <0.05% * Audio formats • MP3 CBR/VBR, up to 320 kbps,...

Open the catalog to page 2

All Barix catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list