video corpo

PL12

PL12

PL12

Product catalog summary
Shelf Life and Storage: The product has a shelf life of 6 months post-production if stored in dry conditions, away from direct sunlight, and at normal room temperature. For further details, the Material Safety Data Sheet (MSDS) and Food Contact Declaration can be requested.
Certification: The films comply with the "COMMISSION REGULATION (EU) No 10/2011" for plastic materials intended for food contact. Production facilities are ISO 9001 and ISO 14001 certified and approved by the British Retail Consortium (BRC).
Product and Food Safety: The film can be used as a paper substitute where a paper-like feel is desired. It features one or two sides corona treated.
Technical Specification:
  • Construction: The film consists of a seal layer, middle layer, and an outer treated layer.
  • Features and Applications: Identified as PL12.
  • Parameters: Various parameters such as thickness, density, yield, coefficient of friction (CoF), tensile strength, and elongation at break are tested using BAREKS and ASTM methods. Specific values are provided for different gauges.
Disclaimer: The information is based on laboratory tests on standard production samples. Due to varying usage conditions, results are not guaranteed. Users should conduct their own tests to determine product suitability.
See more

Catalog excerpts

PL12-1

TECHNICAL SPECIFICATION PL12 CONSTRUCTION Middle layer Outer (treated) layer Seal layer FEATURES AND APPLICATIONS • Paper-like film. • One or two sides corona treated. • Could be used where paper feeling wanted instead of paper. CERTIFICATION Films comply with the requirements "COMMISSION REGULATION (EU) No 10/2011 on plastic materials and articles intended to come into contact with food". All films are produced in ISO 9001, ISO14001 certified facilities and have been approved by the British Retail Consortium (BRC). PRODUCT and FOOD SAFETY For more information please request Material Safety Data Sheet (MSDS) and Food Contact Declaration. SHELF LIFE and STORAGE The shelf life of the product is 6 months after production if it is stored in dry conditions, away from exposure to direct sunlight and at normal room conditions. Prepared by: RD Quality Executive 17.01.2019 Rv:03 Approved by: RD Quality Manager

 Open the catalog to page 1
PL12-2

PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD Quality Executive 17.01.2019 Rv:03 Approved by: RD Quality Manag

 Open the catalog to page 2

All Bareks Plastik Film Ekstruzyon catalogs and technical brochures

  1. PF132

    4  Pages

  2. PF138

    6  Pages

  3. BL13WE

    3  Pages

  4. ML531

    6  Pages

  5. MD53

    3  Pages

  6. LD53AF

    7  Pages

  7. ML53AF

    8  Pages

  8. ML531SA

    7  Pages

  9. ML61

    6  Pages

  10. ML1361

    3  Pages

  11. LD53

    5  Pages

  12. MD53SA

    3  Pages

  13. LD13

    3  Pages

  14. BP31

    3  Pages

  15. BP311

    3  Pages

  16. ML1161OX

    8  Pages

  17. ML534OX

    7  Pages

  18. ML13BL

    2  Pages

  19. ML26WE

    2  Pages

  20. ML53

    8  Pages

  21. ML534

    7  Pages

  22. ML132

    8  Pages

  23. ML1161

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.