PF132
PF132
SP.KK.110 is designed for easy peel applications on PS, PP, PVC, A-PET, and C-PET trays. It requires lamination with materials such as PET, OPP, PVC, Metallized PET, Metallized OPP, Aluminum, OPA, or Paper within one month to maintain proper corona value. For detailed safety and compliance information, users should refer to the Material Safety Data Sheet (MSDS) and Food Contact Declaration.
The films comply with the "COMMISSION REGULATION (EU) No 10/2011" for plastic materials in contact with food. They are produced in ISO 9001 and ISO 14001 certified facilities and approved by the British Retail Consortium (BRC).
The product has a shelf life of one month post-production if stored in dry conditions, away from direct sunlight, and at normal room temperature. It maintains its shape after the lid is opened and provides strong peelable seals to PS and PP, with good peelable seals to PVC and PET.
The film is a conventional easy peel lidding film made from an LDPE/LLDPE blend. It consists of a seal layer, a middle layer, and an outer treated layer. Key parameters include density, yield, coefficient of friction (CoF), elongation at break, tensile strength, gloss, haze, clarity, and transmittance. These properties are measured using BAREKS tests and ASTM standards.
Various parameters such as thickness, density, yield, CoF, elongation at break, tensile strength, gloss, haze, clarity, and transmittance are provided with specific values and test methods. The results are based on laboratory tests and users are advised to conduct their own testing to determine suitability for specific applications.
Catalog excerpts
TECHNICAL SPECIFICATION PF132 CONSTRUCTION Middle layer Outer (treated) layer Seal layer FEATURES AND APPLICATIONS • LDPE/LLDPE blend film. • Conventional easy peel lidding film. • Lamination is required with PET, OPP, PVC, Metallized PET, Metallized OPP, Al, OPA or Paper. • Suitable for easy peel applications of PS, PP, PVC, A-PET, C-PET trays (base webs). • Strong peelable seals to PS and PP, good peelable seals to PVC and PET. • Does not get deformed after the lid opened. • Should be laminated within 1 month to keep proper corona value. CERTIFICATION Films comply with the requirements "COMMISSION REGULATION (EU) No 10/2011 on plastic materials and articles intended to come into contact with food". All films are produced in ISO 9001, ISO14001 certified facilities and have been approved by the British Retail Consortium (BRC). PRODUCT and FOOD SAFETY For more information please request Material Safety Data Sheet (MSDS) and Food Contact Declaration. SHELF LIFE and STORAGE The shelf life of the product is 1 months after production if it is stored in dry conditions, away from exposure to direct sunlight and at normal room conditions. Prepared by: RD Qulity Executive 02.01.2019 Rv:02
Open the catalog to page 1
PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD Qulity Executive 02.01.2019 Rv:02
Open the catalog to page 2
PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD Qulity Executive 02.01.2019 Rv:02
Open the catalog to page 3
PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD Qulity Executive 02.01.2019 Rv:02
Open the catalog to page 4
