ML132
ML132
The document outlines the specifications and performance characteristics of a film product, identified as SP.KK.75. Key features include improved sealing performance, enhanced tear and puncture resistance, and suitability for high-speed machines. The films comply with the EU regulation No 10/2011 for food contact materials and are produced in ISO 9001 and ISO 14001 certified facilities, with approval from the British Retail Consortium (BRC).
The films are suitable for lamination with various materials such as PET, OPP, PVC, Metallized PET, Metallized OPP, Al, OPA, or Paper. They exhibit improved hot-tack properties. The recommended shelf life is 6 months when stored in dry conditions, away from direct sunlight, and at normal room temperature.
The document provides detailed technical specifications, including density, yield, coefficient of friction (CoF), tensile strength, elongation at break, gloss, haze, clarity, and transmittance. These properties are measured using standardized test methods such as ASTM D1894, ASTM D882, and ASTM D1003.
The film is constructed with a seal layer, a middle layer, and an outer treated layer. It is designed for various applications, emphasizing its sealing and mechanical properties.
The product is manufactured in compliance with international standards and regulations, ensuring its suitability for food contact applications.
The document notes that the provided data are results from laboratory tests on standard production samples. Users are advised to conduct their own testing to determine the product's suitability for specific applications, as the results are not guaranteed or warranted.
Catalog excerpts
TECHNICAL SPECIFICATION ML132 CONSTRUCTION Middle layer Outer (treated) layer Seal layer FEATURES AND APPLICATIONS • Suitable for PET, OPP, PVC, Metallized PET, Metallized OPP, Al, OPA or Paper lamination. • Improved sealing performance through contamination. • Improved Hot-tack properties. • Improved tear and puncture resistance. • Suitable for high speed machines. CERTIFICATION Films comply with the requirements "COMMISSION REGULATION (EU) No 10/2011 on plastic materials and articles intended to come into contact with food". All films are produced in ISO 9001, ISO14001 certified facilities and have been approved by the British Retail Consortium (BRC). PRODUCT and FOOD SAFETY For more information please request Material Safety Data Sheet (MSDS) and Food Contact Declaration. SHELF LIFE and STORAGE The shelf life of the product is 6 months after production if it is stored in dry conditions, away from exposure to direct sunlight and at normal room conditions. Prepared by: RD Quality Executive 09.01.2019 Rv:03
Open the catalog to page 1
PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD Quality Executive 09.01.2019 Rv:03
Open the catalog to page 2
PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD Quality Executive 09.01.2019 Rv:03
Open the catalog to page 3
PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD Quality Executive 09.01.2019 Rv:03
Open the catalog to page 4
PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD Quality Executive 09.01.2019 Rv:03
Open the catalog to page 5
PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD Quality Executive 09.01.2019 Rv:03
Open the catalog to page 6
PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD Quality Executive 09.01.2019 Rv:03
Open the catalog to page 7
PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD Quality Executive 09.01.2019 Rv:03
Open the catalog to page 8
