MD53SA
MD53SA
Key Features:
- Easy tear property in machine direction (MD).
- Suitable for horizontal machines.
- Hot-tack property and low coefficient of friction (COF).
- Made from MLDPE blend film.
- Suitable for surface printing with high gloss and low haze properties.
Construction:
- Seal layer, middle layer, and outer (treated) layer.
Applications:
- Ideal for over wrapping applications such as toilet paper, handkerchiefs, and tissues.
Shelf Life and Storage:
- 6 months shelf life if stored in dry conditions, away from direct sunlight, at normal room conditions.
Product and Food Safety:
- Complies with COMMISSION REGULATION (EU) No 10/2011 for food contact.
- Produced in ISO 9001, ISO 14001 certified facilities and approved by the British Retail Consortium (BRC).
Properties and Testing:
- Density: 0.94 g/cm³
- Yield: Varies with thickness (e.g., 42.55 m²/kg for 25 microns).
- Gloss: 80 (ASTM D2457)
- Haze: 16
- Clarity: 90
- Transmittance: 85
- Seal Strength/Elongation: Tested at 3 bar, 130°C, 0.8 seconds.
Note: The information is based on laboratory tests and users should conduct their own testing to determine suitability for specific applications.
Catalog excerpts
TECHNICAL SPECIFICATION MD53SA CONSTRUCTION Middle layer Outer (treated) layer Seal layer FEATURES AND APPLICATIONS • MLDPE blend film. • Suitable for surface printing, • High gloss, low haze properties. • Easy tear property in MD (machine direction). • Suitable for toilet paper, handkerchief and tissue over wrapping applications. • Suitable for horizontal machines. • Hot-tack property • Low COF value CERTIFICATION Films comply with the requirements "COMMISSION REGULATION (EU) No 10/2011 on plastic materials and articles intended to come into contact with food". All films are produced in ISO 9001, ISO 14001 certified facilities and have been approved by the British Retail Consortium (BRC). PRODUCT and FOOD SAFETY For more information please request Material Safety Data Sheet (MSDS) and Food Contact Declaration. SHELF LIFE and STORAGE The shelf life of the product is 6 months after production if it is stored in dry conditions, away from exposure to direct sunlight and at normal room conditions. Prepared by: RD and Quality Executive 17.01.2019 Rv:02
Open the catalog to page 1
PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD and Quality Executive 17.01.2019 Rv:02
Open the catalog to page 2
PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD and Quality Executive 17.01.2019 Rv:02
Open the catalog to page 3
