TECHNICAL SPECIFICATION LD13 CONSTRUCTION Middle layer Outer (treated) layer Seal layer FEATURES AND APPLICATIONS • Conventional lamination film. • Suitable for PET, OPP, PVC, Metallized PET, Metallized OPP, Al, OPA or Paper lamination. • Good sealing strength. • Easy tear in transverse direction (TD). CERTIFICATION Films comply with the requirements "COMMISSION REGULATION (EU) No 10/2011 on plastic materials and articles intended to come into contact with food". All films are produced in ISO 9001, ISO14001 certified facilities and have been approved by the British Retail Consortium (BRC). PRODUCT and FOOD SAFETY For more information please request Material Safety Data Sheet (MSDS) and Food Contact Declaration. SHELF LIFE and STORAGE The shelf life of the product is 6 months after production if it is stored in dry conditions, away from exposure to direct sunlight and at normal room conditions. Prepared by: RD Quality Executive 04.01.2019 Rv:03 Approved by:RD Quality Manag

PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD Quality Executive 04.01.2019 Rv:03

PROPERTIES Unit Test Method BAREKS TEST BAREKS TEST BAREKS TEST MD Tensile Strength TD Elongation at Break Seal Strength / Elongation BAREKS TEST The above information is the result of laboratory tests, which are applied on samples from standard production. Since the varying conditions under which our products used are beyond our control, all of the above results are without guarantee and warranty. Users are advised to conduct their own testing of our products to determine suitability for use alone or in combination with other products. Prepared by: RD Quality Executive 04.01.2019 Rv:03