*mydirectindustry

HP

Product catalog summary

Overview
Bareiss has been manufacturing the HP series of hardness testers since 1954, maintaining a consistent design that remains modern and precise. Over 100,000 units have been sold globally, making it the most widely used manual hardness tester.

Design and Construction
The HP tester features an aluminum chassis, providing a lightweight and durable structure. Each unit is meticulously assembled and calibrated by Bareiss technicians. The use of ball bearings minimizes friction during the indenter's travel, ensuring smooth operation.

Product Variants
The Bareiss HP Series is available in various Shore and non-Shore scales, with customizable presser feet to meet different testing requirements.

Testing Methods and Standards
The HP tester supports multiple testing methods, including Shore A, A0/E, B, 0, C, D, D0, 00, 000, and Bareiss Variant C (Asker C). It complies with several standards such as DIN ISO 7619, DIN EN ISO 868, NF T 51-174, ASTM D 2240, and BS 903 Part A 26.

Materials and Applications
- Shore A: Suitable for soft rubber, elastomers, natural rubber products, neoprene, casting resin, polyester, soft PVC, leather, etc.
- Shore D: Used for hard rubber, hard plastics, acrylic glass, polystyrene, rigid thermoplastics, Resopal, pressure rollers, Vinyl plates, cellulose-Acetate, etc.
- Shore 00 and 000: Ideal for sponge and foam rubber, cellular rubber, silicone.

Features and Benefits
- Aluminum Chassis: Lightweight and durable, suitable for field use.
- Ball Bearings: Reduce friction for accurate measurements.
- Accuracy: Achieves 0.5 unit of Shore accuracy, surpassing the standard tolerance of 1.0 unit.
- Model Range: Available in various scales for diverse applications.

Accessories and Calibration
Accessories include control rings, rubber test blocks, and calibration certificates. The HP Series can be mounted on a BS 61 II test stand for ease of use and stable measurements.

Contact Information
Bareiss Prüfgerätebau GmbH, Breiteweg 1, 89610 Oberdischingen, Germany. Email: [email protected], Website: www.bareiss.de, Phone: +49 (0) 7305 / 96 42-0, Fax: +49 (0) 7305 / 96 42-22.

Accreditation
The company is accredited by DAkkS according to DIN EN/ISO/IEC 17025:2005 as a calibration laboratory.

Catalog excerpts

testing solutions since 1954 HP Mechanical Hardness Tester BARE IS PRODUCT INFORMATION Round shaped device with anti-glare scale. Bareiss has built the evergreen of hardness testers in a nearly unchanged design since 1954. The HP is still as modern and precise as it was 50 years ago. Having sold more than 100 000 units all around the world, it is the most frequently used manual harndess tester. The entire chassis of HP is made of aluminum which provides light weight and durability. Every unit of HP is carefully assembled and calibrated by Bareiss technicians. To avoid indenter traveling with friction, we adopt the technique by combining different sizes of balls in the bearing to help smooth the indenter traveling. Bareiss HP Series is available in different Shore and non-Shore scales and with the possibility of customized presser foot to suit different requirements.

Open the catalog to page 1

testing solutions since 1954 Product Information Testing Methods Shore A, A0/E, B, 0, C, D, D0, 00, 000, Bareiss Variant C (Asker C) Standards DIN ISO 7619, DIN EN ISO 868, NF T 51-174, ASTM D 2240, BS 903 Part. A 26 Features Benefits • Aluminum chassis Suitable to be used in the field due to its light weight and durable chassis • Use of ball bearings Reduce friction during the travel of indenter to achieve the best measuring results • Accuracy Achieving 0.5 unit of Shore compared with the allowable tolerance 1.0 unit of Shore prescribed by the standards. • Wide model range Available in different...

Open the catalog to page 2

All BAREISS catalogs and technical brochures

IRHD Compact III
2 Pages
HPE II
2 Pages