Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. BANSBACH easylift
  3. HB_damper
video corpo

HB_damper

HB_damper
1 / 6 PagesView full catalog

HB_damper

Product catalog summary
Overview: This document provides technical specifications and installation guidelines for Bansbach easylift GmbH's adjustable hydraulic dampers (HB). It includes details on various models, their components, and adjustment procedures.
Specifications:
  • Hydraulic dampers are available in different sizes: 6/15, 8/22, 10/28, and 14/40.
  • Adjustable extension and compression forces range from 20N to 10,000N depending on the model.
  • Materials used include CeramPro®-coated piston rods and black powder-coated cylinders.
  • Connecting parts include threads, hinge eyes, elbow joints, clevises, hinge heads, and ball sockets.
Technical Advice:
  • Dampers are adjusted by turning the piston rod in either a fully extended or inserted position.
  • Type X dampers have a free travel of approximately 20%, while Type Y dampers do not.
  • Maximum extension force for Type Y is 50N to 200N, depending on the model.
  • Connecting parts must be secured against rotation by the customer.
Adjustment Procedure:
  • Adjustments are made by turning the piston rod, either in a fully extended or inserted position.
  • Turning the piston rod to the right increases damping and reduces speed; turning to the left decreases damping and increases speed.
  • Ensure not to damage the adjustment segment by over-tightening.
Installation Recommendations:
  • Mounting is possible in any position, but mechanical limit stops should be in place 1-2 mm before the end of the stroke.
  • Ensure that maximum loads in push and pull directions are not exceeded.
Additional Information: For further technical details and customized specifications, refer to the main catalogue or contact Bansbach easylift GmbH.
See more

Catalog excerpts

HB_damper-1

07/2011 table adjus Hydraulic Damper (HB)

 Open the catalog to page 1
HB_damper-2

adjustable: (Extension and compression force 20N to 800N) Connecting parts Elbow joint Hinge head The flyer is subject to technical alterations and printing mistakes. ansbach easylift GmbH * the length of chosen connecting parts Technical advices: The dampers will be adjusted by turning the piston rod either in completely extended or inserted position (Type Y only in cempletely extended position) Due to constructional reasons, the dampers of Type X have a free travel of approx. 20 % Dampers without free travel are available with floating piston (Type Y). Maximum extension force = 50N. Please...

 Open the catalog to page 2
HB_damper-3

adjustable: (Extension and compression force 30N to 1.800N) Connecting parts Hinge head Ball socket The flyer is subject to technical alterations and printing mistakes. ansbach easylift GmbH * the length of chosen connecting Technical advices: The dampers will be adjusted by turning the piston rod either in completely extended or inserted position (Type Y only in cempletely extended position) Due to constructional reasons, the dampers of Type X have a free travel of approx. 20 % Dampers without free travel are available with floating piston (Type Y). Maximum extension force = 100N. Please indicate...

 Open the catalog to page 3
HB_damper-4

Hydraulic Damper (HB) BSÍlSbSCh adjustable: (Extension and compression force 30N to 3, Connecting parts The flyer is subject to technical alterations and printing mistakes. ansbach easylift GmbH * the length of chosen connecting parts Technical advices: The dampers will be adjusted by turning the piston rod either in completely extended or inserted position (Type Y only in cempletely extended position) Due to constructional reasons, the dampers of Type X have a free travel of approx. 20 % Dampers without free travel are available with floating piston (Type Y). Maximum extension force = 100N....

 Open the catalog to page 4
HB_damper-5

Hydraulic Damper (HB) BSÍlSbSCh adjustable: (Extension and compression force 30N to 10.000N) Connecting parts * the length of chosen connecting parts Technische Hinweise: The dampers will be adjusted by turning the piston rod either in completely extended or inserted position (Type Y only in cempletely extended position) Due to constructional reasons, the dampers of Type X have a free travel of approx. 20 % Dampers without free travel are available with floating piston (Type Y). Maximum extension force = 200N. Please indicate in case of an order. Chosen connecting parts have to be secured against...

 Open the catalog to page 5
HB_damper-6

Technical advices / installation recommendations ■ The maximum loads in push and pull direction may not be exceeded. ■ There must be a mechanical limit stop approx. 1 - 2 mm before end of stroke. ■ Mounting of the dampers is in any position possible. ■ The connecting parts should be secured against rotation. ■ Due to constructional reasons, Type X has a free travel of approx. 20 % ■ For a function without free travel, Type Y has to be chosen. - An adjustment is only possible in completely inserted or extended position - The damping force can be adjusted by turning the piston as described below....

 Open the catalog to page 6

All BANSBACH easylift catalogs and technical brochures

  1. Bansbach Catalogue
    Bansbach Catalogue

    39  Pages

  2. easymotion
    easymotion

    14  Pages

  3. Quick Ship
    Quick Ship

    9  Pages

  4. Feinmechanik AG Swiss
    Feinmechanik AG Swiss

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.