SNAP Signal
22Pages

IIoT Made Easy

Monitor Your Factory Data in a Snap Customers use Banner's Snap Signal hardware and software to instantly unlock valuable data from their equipment and increase productivity. This smart-factory portfolio forms an overlay network by capturing signals from existing and new devices, converting them to a unified protocol, and then distributing them to monitoring platforms, such as SCADA systems, the cloud, or a local PLC/HMI for consumption. The solution deploys easily by leveraging available information without disrupting your existing controls. This helps save you money, reduces downtime, and...

CAPTURE Capture Actionable Data The devices that outfit automated production lines—sensors, tower lights, motor drives, valves, and other components—transmit electronic signals as part of their basic functionality. For example, whenever a sensor detects an item moving along a conveyor, or activates an indication light, or identifies that a motor is running hot, there is a pulse of activity. By adding a system to monitor these signals, you can unlock a wealth of valuable information. By monitoring a single sensor, you begin to understand cycle time, throughput, and uptime. If you had...

QM30VT2 Vibration and Temperature Sensor • Detects dual-axis vibration up to 4 kHz bandwidth • Provides high accuracy vibration and temperature measurements • Industrial grade sensor with small form factor to fit in the tightest locations • Connects to any Modbus network for easy set up and installation S15S Infrared Non-Contact Temperature Sensor • Non-contact infrared temperature sensor outputs temperature to Modbus registers • By detecting emitted infrared energy, the S15S Non-Contact Infrared Temperature Sensor quickly and reliably checks temperatures without needing to be touching the...

S24 Dew Point Sensor • Monitors dew point, humidity, and temperature in a compressed air system • Provides serial data output for use in a control system • Can be installed in the main distribution line or downstream line • Stainless steel housing with an integrated 1/2 NPT process connection QM42 Differential Pressure Sensor • Offers accurate low-differential pressure measurement of air and noncondensing, non-corrosive gases • Silicon piezoresistive differential pressure core • Aluminum alloy housing • Sensing range from ±1 up to ± 20 inches of water column depending on the model • RS-485...

Connect Your Devices Snap Signal products are designed to be part of a plug-and-play solution. Snap Signal incorporates M12 connectors, which are the industry standard for joining devices together. This makes it possible to deliver the benefits of Snap Signal as an "overlay network," which consists of using splitter cables to connect to existing devices. This overlay network is unique. Nothing is disabled from, or interferes with, the existing control system; instead, the attached monitoring connections simply "listen in" to the signals. The overlay network also speeds up the process of...

5-Pin M12 Cordsets (Voltage: 60 V DC/AC, Current: 4 A) Length Straight Cable: Conductors: Temperature: PVC jacket, PUR (polyurethane) connector body, nickel-plated brass coupling nut 22 AWG or 24 AWG (open shield only) high-flex stranded, gold-plated contacts -40° to +90° C 0.9 m 2 m 5-Pin Female QD to 5 m Flying Leads 9 m 19 m 30 m 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray Cable 0 - 5.6 mm 4-Pin M12 Cordsets (Voltage: 250 V DC/AC, Current: 4 A) 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray Cable 0 - 5.6 mm Length Straight 1 = Brown 2 = White 3 = Blue 4 = Black Length...

M12 Splitters and Tees M12 Molded Junction Blocks Models Cable Lengths Branches (Female) Trunk (Male) No Trunk No Trunk 0.3 m 1 m 1 m 2.4 m 4.6 m 7.6 m Unterminated 1 = Brown 2 = White 3 = Blue 4 = Black Cable Lengths Branches (Female) Trunk (Male) 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray Cable Lengths Branches (Female) Trunk (Male) Wiring Diagrams Cable Lengths FIC-M12M4 FIC-M12F4 1 = Brown 2 = White 3 = Blue 4 = Black FIC-M12M5 FIC-M12F5 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray Ethernet Cordsets Length 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray 2 = White 3 = Blue 4 =...

CONVERT S15C Converter Break free from protocol limitations with S15C in-line converters. S15C converters take various types of signals such as discrete, analog, and others and convert these signals to smart protocols like IO-Link or Modbus. This makes it easy to incorporate existing legacy sensors into standard protocols to enable process monitoring. They are designed to connect directly to a sensor, indicator, or other device and begin operating immediately, fitting seamlessly into your factory applications. Convert to a Unified Protocol After the physical connections are made to the...

CONVERT R45C IO-Link to Analog Out Converter R90C Discrete IO-Link Hub The R90C IO-Link Hubs connect two discrete signals to each of the unique ports, providing access to monitoring and configuring those ports with an IO-Link master. Host mirroring is available where a selected port input/output discrete signal can be routed to Pin 2 (male) on the PLC/Host connection. • ompact analog to IO-Link device converter that outputs an analog C value, voltage, or current, as presented by the IO-Link master • Rugged over-molded design meets IP65, IP67, and IP68 • Connects directly to a sensor or...

CONVERT R95C Discrete Bimodal to Modbus Hub R45C Modbus to Dual Analog Input-Output Converter The R95C Discrete Bimodal to Modbus Hub connects two discrete channels to each of the eight unique ports, providing access to monitoring and configuring those ports via Modbus registers. Host mirroring is available where a selected port input/output discrete signal can be routed to Pin 5 (male) on the PLC/Host connection. • ompact Modbus to analog converter that can output C an analog value, voltage, or current as presented to the appropriate Modbus register • he converter can also connect to an...