S15L In-Line Sensor Status Indicator
3Pages

S15L In-Line Sensor Status Indicator Bright indication of sensor power and output status Two colors - one for power and one for sensor output status Rugged over-molded design meets IEC IP66, IEC IP67, and IEC IP68 Connected directly to a sensor or anywhere in-line for easy visual indication Models available with PNP or NPN inputs Models Power ON (Color 1) Input Active (Color 2) 4-Pin Male/Female M12 quick disconnect Wiring Diagrams Male 10 V DC to 30 V DC: Power LED will be ON (Color 1) Not used; Passes through Wire Color Input from sensor: Color 2 overrides Color 1 when active *Continuity between male and female connection for all four wires, including IO-link communications. Specifications Supply Voltage 10 V DC to 30 V DC at 15 mA maximum Supply Protection Circuitry Protected against reverse polarity and transient voltages Leakage Current Immunity 400 µA Indicators 2 colors Color 2 overrides Color 1 Connections Integral male/female 4-pin M12 quick disconnect Construction Coupling Material: Nickel-plated brass Connector Body: PUR translucent white Vibration and Mechanical Shock Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 0.5 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 15G 11 ms duration, half sine wave) Certifications Environmental Rating IP66, IP67, IP68 NEMA/UL Type 1 Operating Conditions Temperature: –40 °C to +50 °C (–40 °F to +122 °F) 90% at +50 °C maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +70 °C (–40 °F to +158 °F) Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) Safety: The S15L Indicator design and PCB composition were evaluated and approved for use with the Banner 4-pin or 5-pin M12 safety products. 40 °C (104 °F) maximum operating temperature for applications requiring UL

S15L In-Line Sensor Status Indicator Dimensions All measurements are listed in millimeters [inches], unless noted otherwise. 57.8 [2.27] 27.9 [1.1] Accessories Cordsets 4-Pin Threaded M12 Cordsets—Single Ended Model Pinout (Female) 1 = Brown 2 = White 3 = Blue 4 = Black 4-Pin Threaded M12 Cordsets—Double Ended Model Male Straight/Female Straight 1 = Brown 2 = White 3 = Blue 4 = Black

S15L In-Line Sensor Status Indicator 3-pin Threaded M8 to 4-pin Threaded M12 Cordsets—Double Ended Model Pinout (Female) Female Straight/ Male Straight Pinout (Male) 1 = Brown 2 = No connection 3 = Blue 4 = Black 1 = Brown 3 = Blue 4 = Black Brackets LMBM12MAG • Attaches to M12 cordset end • Black polypropylene • 11.8 kg (26 lb) pull force • One piece LMBM12SP • Attaches to M12 cordset end • Black polypropylene • Supplied with thread forming hardware • Pack of seven LMBS15MAG • Attaches to S15 housing • White polypropylene • 11.8 kg (26 lb) pull force • One piece LMBS15SP • Attaches to S15...