Radar Sensors for Tank Level Measurement Improve Accuracy and Reliability of Tank Level Measurement Access to more accurate material level data enables a better understanding of material usage, which informs efficient delivery scheduling, improves materials management, and enhances other supply chain predictions. • Enable accurate, real-time tank level measurements of liquid or dry materials • Monitor your tank level both locally and remotely • Reduce labor spent manually checking material lev

Liquid Level Measurement Radar sensors offer a unique benefit over other sensing technologies: when mounted externally on certain plastic tanks, they can sense through the tank wall and measure the level, keeping the sensor separate from the material altogether. With its immunity to dust, dirt, and steam, radar technology also provides superior and consistent measurement in almost any environment. A T30R mounted on a tall tank can use its narrow beam width and long sensing range to measure chemicals or other caustic agents that could damage an internally-mounted sensor. Even if the tank wall...

Dry Goods Level Measurement Levels of dry, granular materials, such as plastic pellets used in injection molding or feed used at a fish farm, are more challenging to detect than liquids. Unlike leveling out like liquids, they form a peak as they accumulate and drain in the reverse, causing the center to empty first and leaving the edges higher. These ever-changing angles can reflect energy away from the sensor’s receiver, leading to more complicated detection. The wide beam of the Q90R reliably detects and measures dry goods in a tank by receiving more reflected signals than a sensor with a narrow...

Radar Sensors for Tank Level Measurement Q90R Series Powerful Detection and Measurement in Nearly Any Environment • R eliable detection of dry, granular goods in a wide range of tank level monitoring applications • Rugged IP67 and IP69K-rated housing for operation in harsh environments • Intuitive interface enables simple integration and streamlines troubleshooting • Enhance equipment performance with advanced configuration and detection • IO-Link gives access to real-time process data, and allows sensor parameter adjustments and diagnostic viewing Q90R2 Q90R Models Beam Pattern Detection Range...

T30R Series Bridges the Gap Between Radar and Ultrasonics • Reliable detection of liquids in a wide range of tank level monitoring applications • IP67-rated housing is unaffected by rain, wind, snow, fog, steam, sunlight, and has an operating temperature of -40 to 65° C • T30RW model features IP69K-rated housing for use in challenging environments • R adar Configuration Software, IO-Link, remote teach input, and push buttons for flexible set-up and configuration T30RW • P ulse Pro output for direct integration with Banner lights; direct process feedback that only requires power; no controller...

Radar Sensors for Tank Level Measurement K50R Series Reliable, Cost-Efficient Sensing for Short-Range Applications • Superior and consistent operation in any environment Standard Flush Mount • Cost-efficient alternative to long-range ultrasonic sensors Pro Flush Mount • Simple integration and streamlined troubleshooting • Easy set up and configuration with the Banner Measurement Sensor Software • Bright, visible indication available in Pro models with configurable LEDs • Base and flush mount options for versatile mounting Standard Base Mount Pro Base Mount Beam Pattern Flush mount Base mount...

Monitor Tank Levels Locally and Remotely Easily view fill levels when and where you need to • IO-Link simplifies communication and control across the system • IO-Link-enabled strip lighting visually communicates real-time fill levels locally • Banner Cloud Data Services software provides remote monitoring of fill levels Description (remote) IO-Link radar sensor with 15° x 15° beam pattern Industrial controller M12 double ended extension cordset 4-pin M12 D-code to RJ45 shielded ethernet cordset Heavy duty sealed light strip Banner Cloud Data Services 900 MHz Serial Data Radio

Combine Lights with Radar Sensors to See Tank Level at a Glance • Complete plug-and-play solution compatible with a variety of sensors and Pro lights • No external controller required • LED lighting visible at extended distances Description (on tank) Radar sensor with 15° x 15° beam pattern M12 double ended extension cordset Heavy duty sealed light strip Visually Communicate Fill Level without a Controller Pulse Pro I/O uses Pulse Frequency Modulation (PFM) to digitally represent an analog measurement value from a discrete sensor. Banner Engineering uses this technology to simplify the connection...