Multipoint Sensing with One Device • Detect more reliably across a wide area • Use less hardware and save commissioning time • Customize configuration with intuitive Banner Measurement Softw

Wide-Area Detection Can Monitor Two Separate Areas Multipoint Sensing with One Device • Detect more reliably across a wide area • 45° x 45° beam angle and 2 meter range allow for detection in a large area 4 measurement points can capture the nearest distance and 6 average height over a large area, yielding more information than a single point sensor D time of flight technology measures angled targets more 3 reliably than other methods, including ultrasonic • Use less hardware and save commissioning time • wo independently configured outputs let operators monitor T two separate areas Less hardware...

See Complete Bin Fill Levels with Two Measurements Challenge Metal shavings from machining automotive parts fill up a scrap bin. The area nearest the outlet fills up faster than other parts of the bin. Multiple sensors are needed to monitor different areas of the bin to prevent overfilling, plus another sensor that monitors the fill level and alerts an operator to spread out the shavings. Solution Rather than multiple sensors, a single K50Z has a large 45 x 45 degree viewing area, 64 measurement points, and two independently configured outputs. One output can track peak height and monitor for...

K50Z Multipoint Sensors Series Housing Style Sensing Range Field of View Dimensions Supply Voltage Beam Angle Response Time Operating Conditions Environmental Rating Required Accessory for Device Configuration PRO-KIT Power supply, splitter, Pro converter cable SMBAMSK50R Adjustable mounting bracket SMBK50RA Right-angle mounting bracket 5-Pin M12 Straight connector models listed; for right-angle models, add A to the end of M12F5 (example, BC-M12F5A-22-2) Banner Engineering Corp. 1-888-373-6767 • www.bannerengineering.com © 2024 Banner Engineering Corp. Minneapolis, MN USA