ULTRA-LOK® Application Tool The Next Generation Advanced Application Tool! Longer charge and battery life. Now powered with a Lithium-ion battery, the UL4000-C battery charge lasts longer with consistent peak performance through the life of the battery. Combined with the ULTRA-LOK® band and buckle system, the UL4000-C delivers a finished product that is typically stronger than crimped or swaged industrial hose assemblies. The UL4000-C uses a mechanical clutch and predetermined torque settings to provide a consistent tightness that eliminates assembly guesswork. The UL4000-C installation tool allows for a comfortable installation with better balance and portability. Installs ULTRA-LOK® band clamps 25% tighter than when installed with traditional tools. The increased power of the UL4000-C installation tool works in combination with the exclusive ULTRA-LOK® 1/4 hard, high tensile type 201 stainless steel bands and clamps to form a tighter, consistent lock under full tension. Clamping is 3-5 times faster than conventional banding tools when tensioning a band clamp. Less time in the work zone! Take the UL4000-C Installation tool to the site of installation. The UL4000-C, with its spare Lithium-ion battery provides all of the ULTRA-LOK® best characteristics to make this tool the most powerful portable band clamp installation tool ever. ULTRA-LOK® Tool Part. No. ULTRA-LOK® tool comes fully assembled in a custom protective case made with impact resistant HDPE thermoplastic. Included with the UL4000-C: 1- spare 18 volt Lithium-ion battery, 1- battery charger, tool lubrication/assembly tool kit and operators manuals. 1/2” shear plate is compatible with the UL 4000-C, UL4000-B, UL4000, and UL9010 to convert from 3/4” ULTRA-LOK® to 1/2” ULTRA-LOK® Clamp systems. For models of the UL9010 built prior to October 2006, use the ULK249 upgrade kit.

Pre-Formed Clamps for Faster, Easier Building of Hose Assemblies Use ULTRA-LOK® clamps with smooth inside diameter buckle design to reduce leak paths and assure your fittings stay secure. • The 3/4” wide ULTRA-LOK® Pre-Formed Clamps are available in outside hose diameters from 2” to 9” • *The 1/2” wide ULTRA-LOK® Pre-Formed Clamps are available in outside hose diameters from 1 1/2” to 4” *Requires the optional shear plate M09387 Fast and Easy Band Clamping Using Free-End ULTRA-LOK® Band and Buckles 1. Break off an ULTRA-LOK® Free-End band from the roll. Slide the buckle onto band with indented...