BAND-IT Hose & Attachement Solutions Guide
20Pages

Hose & Attachement Solutions Guide w w w. b a n d - i t - i d e x . c o m HOSE CLAMPING Engineered Fastening Solutions

BAND-IT® IDEX, Inc. is an innovative clamping solutions company providing service and value second to none! Certificates As demonstration of our ongoing commitment to excellence, quality and environmental management, BAND-IT is proud to display the following certicates of compliance to the prestigious International Standards: • ISO 9001 • ISO 14001 • TS16949 Since becoming ISO/TS certified, BAND-IT ® continues to seek new and innovative ways to manufacture products through our continuous efforts of upgrading equipment, employee training and internal quality assurance in our quest to deliver...

DESCRIPTION Chemical Plants, Food Processing, Plant Maintenance, Government, Communications & Utility Engineered Fastening and Bundling Systems for Extreme Conditions: I d entific atio n Syste m . . . . . . . . . . . . . . . . . 14- 15 Hose, identification, Engineered Applications. Products: Ultra-Lok, Junior Smooth ID, Center Punch, Adjustable Clamping Systems, BAND-IT® Tie, BAND-FAST®, Uncoated and Coated Band & Clip. Superior performance in extreme temperatures, chemical exposure, salt spray conditions and UV light exposure Permanent and secure locking mechanisms Reliable and efficient...

Manufactured from our plant in Denver, Colorado. Rugged design for the most demanding hose assembly Engineered to eliminate leak paths Patented lock design Installed with electric or cordless power tool Ideal use in heavy duty suction and discharge applications. Double wrapped 1/4 hard type 201SS for superior strength. ® Ultra-Lok Preformed Clamp Junior Smooth ID Clamp Ideal for use in agricultural or petrochemical environments. Double wrapped 201 Stainless Steel for superior strength. NOTE: Most Clamps Are Available In Alloy 625, Alloy 400, 316SS, 201SS or GCS! Hose Fittings E-mail:...

The Ultimate Clamping Solution! E-mail: info.BAND-IT@IDEXCorp.com

ULTRA-LOK CLAMPING SYSTEM ® Preformed Clamping Systems Designed for quick installation, highest clamping force and gapfree inside diameter. The best choice for demanding applications! • • Buckle is thicker and 2-3 times stronger than other preformed clamps Smooth inside diameter designed to eliminate leak paths Buckle hood protects lock from snags Install Ultra-Lok® clamping systems quickly using portable power tools 1/2" Ultra-Lok Band and Buckles. Unique lock formed under full tension maximizing tightness Double wrapped 1/4 hard type 201SS for superior strength 3/4" Ultra-Lok Band and...

ULTRA-LOK CLAMPING SYSTEM ® UL 9010 Ultra-Lok® Electric Tool • Ultra-Lok clamps 1/2" & 3/4" either preformed or Band and Buckle can be applied UL4000-C Ultra-Lok® Cordless Tool • Locks under full tension • Ultra-Lok clamps 1/2"* & 3/4" either preformed or Band and Buckle can be applied • Adjustable speed and torque • Locks under full tension • Adjustable speed and torque • Ideal for production and large diameter hose clamping • Consistent, repeatable tensioning • Consistent, repeatable tensioning • Ultra-Lok clamps can be applied four times faster than conventional clamps • Supplied with...

BAND-IT JR® SMOOTH ID Preformed Clamping Systems Widest choice of sizes and materials in a leak resistant design. • Vibration resistant lip lock design. Lock is formed by a simple lever movement. No hammering or crimping Unique buckle nest and smooth ID design reduces leak paths Double wrapped steel bands for additional strength Various materials for different corrosive environments Install BAND-IT Jr Smooth ID preformed clamps using the C00269, S35099, S75099 C00169 Banding Tool with Junior adapters: J00169, J05069 Available for 3/8" hose up to 8" outside diameter Inside Diameter E-mail:...

BAND-IT JR® SMOOTH ID Preformed Clamping Systems Widest choice of sizes and materials in a leak resistant design. E-mail: info.BAND-IT@IDEXCorp.com

Engineered Clamping Solutions! E-mail: info.BAND-IT@IDEXCorp.com

CENTER PUNCH CLAMPS Preformed Clamping Systems Designed to meet your specific application requirement. • Lock with impact from a hammer using a conical punch designed into the tool Double wrapped steel bands using 201 Stainless Steel or galvanized carbon steel Manufactured with 201 Stainless Steel buckles to provide added locking strength Not recommended for use with fittings that may crack as a result of impact or poly fittings Install 3/8" and 5/8" width Center Punch clamping systems with the following hand tools: S03869, T30069. The SM1700 Pneumatic Production Tool installs 5/8" clamps...

ADJUSTABLE CLAMPING SYSTEMS Adjustable Clamping Systems Worm Gear Clamp BAND-IT® Scru-Seal Kit uses a rack and pinion system allowing the user to make a clamp in any size. Kit offers complete flexibility for use in almost any application. Form clamps of any diameter from continuous roll of band and tension using only a screwdriver. • A rack and pinion system used with band to create any size clamp • Components are separately packaged for flexibility • Stainless steel offers very good resistance to mild atmosphere, fresh water and the sun’s UV rays • An adjustable style worm drive,...

Pro-Mark LCD Pin Marker & Pro-Mark USB Pin Marker TM • Programmable Marking • Component Identification • Component Traceability • Serial Numbering • Logo Marketing • Label and Tag Marking • Part Numbering • Batch and Shift Coding USB Plug and Play with Windows compatible Software. Easy to use, on-screen creation of marking layouts using simple drag and drop graphical interface. Layouts can be rapidly created and checked before marking. Technical Specifications • Standard Character Sizes: 0.18mm - 99.9mm in increments of 0.18mm Marking Formed: 5 x 7, 7 x 9, Varidot, all Windows True Type...