BALL-LOKT™ TIES
4Pages

Manufactured from Type 316 and Type 304 Stainless Steel The Ball-Lokt™ Tie unique buckle design is fast becoming the globally accepted industry standard. • Four widths – 0.18" (4.6mm), 0.31" (7.8mm), 0.47" (12mm), and 0.59" (15mm) for applications ranging from identification tagging to bundling large cables Self locking design allows fast installation Installation by hand or with tools to assure uniform tension and clean tail cut-off for safe handling Available in Type 304 and Type 316 stainless steels to provide good to excellent corrosion resistance in a wide variety of environments Ball-Lokt™ Ties Ball-Lokt™ Ties Coated Ball-Lokt™ Ties are fully coated with black epoxy Used in cable management applications to reduce the risk of cutting or abrading cable gth ren t lS a on pti Self-Locking Application ce 1. As the stainless steel band is inserted into the buckle, the internal locking ball rolls Ex freely. 2. During tensioning, the band wedges into the buckle locking it tightly between the buckle and the band. WORLD HEADQUARTERS EUROPEAN OPERATIONS CHINA SHANGHAI SALES OFFICE Locking Direction LATIN AMERICA SALES OFFICE Stainless Steel Cable Ties Ball-Lokt™ corrosion resistance is ideal for harsh

Total Fastening Solutions Ball-Lokt™ Ties provide a longer life than nylon ties, especially in extreme climates. The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Ball-Lokt™ Ties UNCOATED Part Number Material Minimum Loop Tensile Strength lbs Package Weight Quantity Per Bag lbs kg Application Tools Ball-Lokt™ Uncoated Use This Guide to Customize Configure Your Order Custom lengths can be made in 50mm increments to meet specific requirements without limits. Use this part number when calling BAND-IT to place an order and to...

Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency. Ball-Lokt™ TiesCOATED Black Epoxy Base Diameter Material Single Part Number Material Width Length Thickness Wrap Minimum Loop Tensile Strength lbs Package Weight Quantity Per Bag lbs kg Application Tools Ball-Lokt™ Coated Loop tensile strengths range from 125 to 325 pounds, dependent on width, allowing you to select the tie strength that best suits your application. Shown is the XE9229 Tensioning Tool used to easily install an uncoated Ball-Lokt™ Tie prior to a smooth...

Total Fastening Solutions BAND-IT Ball-Lokt Installation Tools Install Ball-Lokt™ Ties with these tools based on application needs. Consistent Tension, Smooth Cut Off Ties up to 7.8mm width ties even if epoxy coated. The adjustable tension control assures consistent tension of ties with a smooth tail cut off. K50289 Ball-Lok Tool Cat. Weight Hand tool to apply uncoated and coated Ball-Lokt™ Ties with adjustable tension control. Cuts off excess tail without sharp edges. For use with 4.6 and 7.8 mm ties. WORLD HEADQUARTERS Used with Coated and Uncoated Ties Tensions and cuts off Ball-Lokt™...