Vibration Meter-Tachometer-balancer-thermometer BALTECH VP-3460
6Pages

Universal balancing procedure The best portable balancer in its class Inexpensive multifunctional portable kit Extended warranty months

Vibrometer-Tachometer-Balancer-Thermometer BALTECH VP-3460 The new inexpensive BALTECH VP-3460 is the upgrade version of the BALTECH previous balancing instruments. Application Unbalance is a main reason of increased vibration of rotating machinery, which results in heating of bearing assemblies. This leads to rapid wear of bearings, shafts and other parts, increased vibration and noise level as well as to loss of efficiency of the machinery. Unbalance elimination is a difficult task and requires complex measurement equipment and experienced personnel. The new multifunctional kit BALTECH-VP...

Universal kit for field balancing Operation modes VIBRATION ANALYSIS and PHASE METER Operation modes TACHOMETER and THERMOMETER Tachometer • Speed measurement. • Frequency measurement. • Check of photosensor. Analyser • Automatic frequency detection. • Manual input of frequency. overall vibration level and first harmonic level. Phasemeter measurement phase without using the Balancer Balancer mode • Dynamic balancing. • Set of number of control points and correction planes. Balancing method setting • Dynamic Coefficient Method. • Trial run. What is DIC? Linear dependence between the...

Vibrometer-Tachometer-Balancer-Thermometer BALTECH VP-3460 Additional calculations • Calculation of the trial weight based on the existing statistic and dynamic parameters of the rotor. • Weight division if there no way to install the weight on the calculated location (e.g. between fan blades). • Vector calculations. Route measurement using the BALTECH-Expert software Vectors addition and subtraction When there is now way to install the balancing weight on a particular location we recommend that you use the vector calculator to sum or subtract the weights (vectors). The tool is useful for...

Universal kit for field balancing Upper connectors are designed for cable with the vibration sensor, temperature sensor and speed sensor(the sensors and cables are included into the delivery set) and PC. The power connector is located on the lower panel. The instrument has a metrological certification and is registered in the State register of measuring equipment The warranty is 24 months. The use of the instrument requires no special skills. The detailed operation manual and methodological materials as well as initial training at the BALTECH training centre (is included into the cost of...

Frequency range, Hz Range of RMS value of velocity, mm/s Range of peak-to-peak displacement, µm Temperature measurement range, °С Speed frequency range, RPM Speed frequency accuracy, % Measuring range of vibration vector phase, degrees info@baltech.biz +49 (0) 451-370-87-700 Kronsforder Allee 45, 23560 Lübeck Germany TECHNICAL SPECIFICATION: 0÷359 Autonomous From batteries Not less than 8 5,8±0,1 208х100х40 Electric power supply Time of autonomous work, hours Complete weight, kg Weight of the instrument, kg BALTECH VP-3460 – vibrometer- balancer- thermometer (basic and comprehensive) Basic...