Vibration Meter BALTECH VP-3410
1Pages

{{requestButtons}}

Catalog excerpts

Vibration Meter BALTECH VP-3410 - 1

BALTECH VP-3410 is a portable vibration measurement device (vibration tester). The vibration meter is connected with the external sensor via the cable. The vibration meter BALTECH VP-3410 performs measurement of the vibration acceleration, vibration velocity and vibration displacement. It is intended to monitor a machine technical condition and to detect its defects. BALTECH VP-3410 operates in the range from 1 kHz to10 kHz and measures the vibration values of bearing units. The technical characteristics of the vibration meter comply with the international standards ISO:10816, as well as other vibration meters of this series. Technical characteristics BALTECH VP-3410 Parameter Delivery set BALTECH VP-3410 Item Measurement range Peak Vibration acceleration, m/s2 RMS Vibration velocity, mm/s Peak - Peak Vibration displacement, um Operation frequency range, Hz Vibration acceleration &Vibration velocity Vibration displacement High frequency acceleration Measurement error of the Vibration Acceleration at the reference frequency 160 Hz and the Vibration velocity at the reference frequency 80 Hz Operation manual Operation temperature range, ºС Vibration sensor with a cable, magnet and protection shield ±2 dgt ±(0,06 х х) where х – vibration value Continuous operation time, h Measurement error of the Vibration displacement at the reference frequency 45 Hz Measuring unit Technical characteristics can be changed without notice. By ordering you can choose a color of the device case: grey, blue, green or deep red. This quotation is valid for wholesale buyers. BALTECH GmbH Kronsforder Allee 45 23560 Lübeck Germany

Open the catalog to page 1

All BALTECH GmbH catalogs and technical brochures