THE INDUCTION HEATERS FOR HEATING OF BEARINGS, SLEEVES, GEARS AND OTHER METAL PARTS WHICH ENSURES A RELIABLE INTERFERENCE FIT DEVICES AND SYSTEMS FOR INDUSTRIAL EQUIPMENT MAINTENANCE AND REPAIR

Induction heater A new unique development has no analogues in the world. The induction heater Baltech HI – 1612 is a modification of Baltech HI – 1610 induction heater with two yokes, which allows heating two parts simultaneously, thus saving time required for heating. The technical characteristics are similar to those of the Baltech HI – 1610 induction heater. Delivery set of BALTECH HI-1604 Hot plate Temperature sensor Thermal-resistant gloves Operation manual Package Temperature sensor Yokes – (see table) Thermal-resistant gloves A lightweight electrical hot plate Baltech HI-1604 for heating...

H HI Series induction heaters Operation manual Package A compact induction heater HI -1610 with an electronic control is a small size and low weight, high performance and cost effective device. The induction heating can be conducted both in a vertical and horizontal direction. Maximum weight of a heated part is 12 kg. The induction heater performs an automatic demagnetization of bearings after their heating to a defined temperature. The Baltech HI- 1610 induction heater is equipped with an automatic overheating protection. It is easy to use. Lubricant (option) Transportation trolley - upon request...

TECHNICAL DATA OF THE BALTECH HI INDUCTION HEATERS BALTECH HI-1610 ELECTRICAL SYSTEM Nominal power, kW Voltage, V/Current, A Frequency, Hz Yoke HEATED PART Max. bearing weight, kg d,mm (min inner diameter) D,mm (max outer diameter) Width, mm Length, mm YOKE SIZE Width, mm Length, mm CONTROL PANEL Temperature setting, ºC Maximum temperature without sensor, ºC Automatic demagnetization DIMENSIONS Dimensions, mm Weight of the heater without yokes, kg Technical characteristics can be changed without notice. By ordering you can choose a color of the device case: grey, blue, green or deep red. This...