Bearing Condition Monitoring Stand BALTECH BCM
2Pages

RELIABILITY TECHNOLOGIES RESOURCE-SAVING TECHNOLOGIES Stands BALTECH BCM-6050 and BALTECH BCM-6150 are designed to check bearings (used and unused) before their mounting during the repair of industrial equipment. Besides, BALTECH BCM-6050 and BALTECH BCM-6150 should be used by enterprises for the incoming inspection BEARING CHECK MACHINES The stands were designed on the basis of the measurement method and standards ISO 15242: Rolling Bearings. Vibration Measurements. This measurement method was approved by the All-Union Scientific Institute of the Bearing Industry. This measurement method is applicable to the rolling element bearings, including those with one and two protective washers and seals: Single-row and double-row radial ball bearings; Single-row and double-row radial-thrust ball bearings; Radial roller bearings with short cylindrical rollers; Tapered roller bearing; Radial roller spherical single-row and double-row bearing; Angular-contract spherical roller bearing. * Some bearing types require additional accessories Automatic diagnostics of technical condition of rolling element bearings during incoming inspection Registration and analysis of vibration signals from sensors, mounted on bearings, for checking technical condition of rolling element bearing. Storage of rolling element bearing data base for selection of reliable suppliers and optimization of nomenclature TECHNICAL CHARACTERISTICS Technical characteristics can be changed without notice. By ordering you can choose a color of the device case: grey, blue, green or deep red. This quotation is valid for wholesale buyers. SUPPLY OF DEVICES AND EQUIPMENT TECHNICAL STAFF TRAINING INDUSTRIAL EQUIPMENT MAINTENANCE Baltech GmbH □ Kronsforder Allee 45 23560 Lubeck Germany

RELIABILITY TECHNOLOGIES Lubeck / Germany SCIENTIFIC AND TECHNICAL SEMINAR « RELIABILITY TECHNOLOGIES» ■ ^Reliability technologies* as a base of resource saving of the industrial equipment. ■ Tasks of technical diagnostics and maintenance of industrial ■ Methods of technical diagnostics and non-destroying control. ■ Fundamentals of equipment alignment, alignment and centering of machine geometry. ■ Infrared camera diagnostics. Methods of thermal control at the enterprise. Infrared cameras and their application. ■ Vibration d iag nostics of dyna m ic (rotor) eq u ip ment. ■ Dynamic balancing...