Basic Features
Application: Object detection
Approval/Conformity: CE, cULus, WEEE, UKCA
Basic Standard: IEC 60947-5-2
Scope of Delivery: Includes 2x nut M08x1

Display/Operation
Function Indicator: Yes
Power Indicator: Yes

Electrical Connection
Connection: M8x1-Male, 3-pin, A-coded
Electrical Version: 3-wire
Polarity Reversal Protection: Yes
Protection Against Device Mix-ups: Yes
Short-circuit Protection: Yes

Electrical Data
Load Capacitance Max. at Ue: 1 µF
Min. Operating Current Im: 0 mA
No-load Current Io Max., Damped: 7 mA
No-load Current Io Max., Undamped: 5 mA
Operating Voltage Ub: 10...30 VDC
Output Resistance Ra: Open drain
Rated Insulation Voltage Ui: 75 V DC
Rated Operating Current Ie: 100 mA
Rated Operating Voltage Ue: DC 24 V
Rated Short Circuit Current: 100 A
Ready Delay tv Max.: 50 ms
Ripple Max. (% of Ue): 15%
Switching Frequency: 600 Hz
Utilization Category: DC -13
Voltage Drop Static Max.: 1.3 V

Environmental Conditions
Ambient Temperature: -25...70 °C
Contamination Scale: 3
Shock: EN 60068-2-27, Half-sinus, 30 g, 11 ms
Vibration: EN 60068-2-6, 55 Hz, amplitude 1 mm, 3x30 min
IP Rating: IP67

Functional Safety
MTTF (40 °C): 1410 years

Interface
Switching Output: PNP normally open (NO)

Material
Housing Material: Die-cast zinc, nickel-plated
Material Sensing Surface: PBT

Mechanical Data
Dimension: Ø 8 x 65 mm
Installation: For flush mounting
Size: M8x1
Tightening Torque Max.: 3 Nm

Range/Distance
Assured Operating Distance Sa: 1.6 mm
Hysteresis H Max. (% of Sr): 15%
Rated Operating Distance Sn: 2 mm
Repeat Accuracy Max. (% of Sr): 5%
Switching Distance Marking: ■■
Temperature Drift Max. (% of Sr): 10%
Tolerance Sr: 10%

Remarks
The sensor is functional again after the overload has been eliminated.
Installation instructions for inductive sensors are available in the download area on the homepage.
Status LED:
Off: No supply voltage or sensor defective
Green: Sensor ready, supply voltage applied
Yellow: Target detected
Red: Error detected: short circuit, undervoltage < 5-8 VDC, overtemperature or overload
Error condition is only displayed in damped state.
For more information about MTTF and B10d, see MTTF / B10d Certificate.
Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way.