Inductive Sensors Approval/Conformity cULus CE UKCA WEEE Basic standard IEC 60947-5-2 Electrical connection Cable diameter D Cable length L Conductor cross-section Connection type Number of conductors Polarity reversal protected Protection against device mix-ups Short-circuit protection Electrical data No-load current Io max., damped 6 mA No-load current Io max., undamped 2 mA Output resistance Ra Open drain Rated insulation voltage Ui 75 V DC Rated operating current Ie 100 mA Rated operating voltage Ue DC 24 V Rated short circuit current 100 A Voltage drop static max. 2 V Environmental conditions Ambient temperature Contamination scale EN 60068-2-27, Shock EN 60068-2-6, Vibration IP rating Functional safety Subject to change without notice: 235779

Inductive Sensors Interface Switching output Material Housing material Material jacket Material sensing surface Mechanical data Dimension Installation Size Tightening torque Rated operating distance Sn 1.5 mm Real switching distance sr 1.5 mm Switching distance marking ■■ Remarks The sensor is functional again after the overload has been eliminated. For more information about MTTF and B10d see MTTF / B10d Certificate Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no warranty implications....