Inductive Sensors BES M18MI-PSC80B-S04G Order Code: BES008L 3ALLUFF Basic features Electrical data Approval/Conformity CE UKCA cULus WEEE Basic standard IEC 60947-5-2 Trademark Global Display/Operation Function indicator yes Electrical connection M12x1-Male, 3-pin, A-coded yes yes yes Connection Polarity reversal protected Protection against device mix-ups Short-circuit protection Load capacitance max. at Ue Min. operating current Im No-load current Io max., damped No-load current Io max., undamped Operating voltage Ub Output resistance Ra Protection class Rated insulation voltage Ui Rated operating current Ie Rated operating voltage Ue DC Rated short circuit current Ready delay tv max. Residual current Ir max. Ripple max. (% of Ue) Switching frequency Utilization category Voltage drop static max. Environmental conditions Ambient temperature Contamination scale EN 60068-2-27, Shock EN 60068-2-6, Vibration IP rating Functional safety MTTF (40 °C) 465 a Interface Switching output PNP normally open (NO) Subject to change without notice: 234533

Range/Distance Assured operating distance Sa 6.4 mm Rated operating distance Sn 8.0 mm Real switching distance sr 8 mm Switching distance marking ■■ Temperature drift max. (% of Sr) 15 % Tolerance Sr ±10 % Inductive Sensors BES M18MI-PSC80B-S04G Order Code: BES008L Material Housing material Brass, Nickel-free coated Material sensing surface PBT Mechanical data Installation for flush mounting Remarks The sensor is functional again after the overload has been eliminated. Flush: See installation instructions for inductive sensors with extended range 825357. For more information about MTTF and B10d...