Catalogs >
Balluff GmbH >
BES0086

BES0086
2Pages

Catalog excerpts

Inductive Sensors Electrical data Basic features UKCA cULus WEEE Basic standard IEC 60947-5-2 Trademark Global Electrical connection M12x1-Male, 3-pin, A-coded yes yes yes Connection Polarity reversal protected Protection against device mix-ups Short-circuit protection Load capacitance max. at Ue Min. operating current Im No-load current Io max., damped No-load current Io max., undamped Operating voltage Ub Output resistance Ra Protection class Rated insulation voltage Ui Rated operating current Ie Rated operating voltage Ue DC Rated short circuit current Ready delay tv max. Residual current Ir max. Ripple max. (% of Ue) Switching frequency Utilization category Voltage drop static max. Environmental conditions Ambient temperature Contamination scale EN 60068-2-27, Shock EN 60068-2-6, Vibration IP rating Functional safety Switching output PNP normally open (NO) Subject to change without notice: 234532

Open the catalog to page 1

Range/Distance Assured operating distance Sa 4.0 mm Rated operating distance Sn 5.0 mm Real switching distance sr 5 mm Inductive Sensors BES M18MI-PSC50B-S04G Order Code: BES0086 Material Housing material Brass, Nickel-free coated Material sensing surface PBT Mechanical data Installation for flush mounting Remarks The sensor is functional again after the overload has been eliminated. For more information about MTTF and B10d see MTTF / B10d Certificate Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential...

Open the catalog to page 2